Quickfarms Posted May 5, 2020 Share Posted May 5, 2020 I have to replace the drivers door on my 1975 RS685LT and I need to replace all of the weather striping, etc for both the vent window and roll up window. What is a good source and part numbers? Quote Link to comment https://www.bigmacktrucks.com/topic/62387-door-window-weatherstripping/ Share on other sites More sharing options...
Coenut Posted May 7, 2020 Share Posted May 7, 2020 Restoration specialties has all of that. Even some with the stainless bead. They are fantastic and will send you samples to verify for before you buy lengths. I used them for the doors on my r model. I have a set of workers that I bought from watts of you need. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/62387-door-window-weatherstripping/#findComment-450581 Share on other sites More sharing options...
kscarbel2 Posted May 7, 2020 Share Posted May 7, 2020 On 5/5/2020 at 5:43 PM, Quickfarms said: I have to replace the drivers door on my 1975 RS685LT and I need to replace all of the weather striping, etc for both the vent window and roll up window. What is a good source and part numbers? For both doors, you need 4 pieces of Mack part number 440SX30A. The 440SX30A is for the tracks on the removeable door panel, and the upper section of the door (you'll need to cut/shorten that upper piece). You only use the included brass retaining clips on the removeable door panel tracks. The vent window post felt is different, and is (was) sold under a vendor number 2795-170014005 (1 per vent window). The roll-up window "wipers" are Mack part numbers 35RU223 and 35RU224 (2 each). Quote Link to comment https://www.bigmacktrucks.com/topic/62387-door-window-weatherstripping/#findComment-450584 Share on other sites More sharing options...
Quickfarms Posted November 4, 2022 Author Share Posted November 4, 2022 Is the rubber around the vent widow available? if it is what is the source and part number Quote Link to comment https://www.bigmacktrucks.com/topic/62387-door-window-weatherstripping/#findComment-514338 Share on other sites More sharing options...
mowerman Posted November 5, 2022 Share Posted November 5, 2022 That would be wonderful I don’t need any but it’s nice to know a regular glass shop will have the felt for the bottom and top the rubber may be a little issue good luck.. bob Quote Link to comment https://www.bigmacktrucks.com/topic/62387-door-window-weatherstripping/#findComment-514378 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.