Popular Post AZB755V8 Posted July 8, 2020 Popular Post Share Posted July 8, 2020 Anyone interested in New R Model interiors? I have Black and Tan material on order now. Possibly, Blue, Red and Gray. Starting prototype panels now to see how it will stitch out. These interiors will be as close to original as possible but with new materials. Vinyl is possible as used in the OEM stuff but mono-tone not the "like something was smeared all over it look". The new Faux leather look material is really nice, durable and a real upgrade. Both Eastern and Western styles will be produced. Western "bulldog" on door will be embroidered not heat sealed. Just putting it out here to see if there is an real interest to make and stock interior kits. I have checked everywhere and no one is making kits for R Models, I need one for my RW. Pricing for door panels, headliner, lower cab back, windshield pillars and above door panels will be about $1500. Western slightly higher due to diamond tuck stitching. Carpet and kick panels will be available a little later. Kits should be available about 2 months after I decide to pull the trigger and buy the piece of needed CNC equipment to stitch out the panels. This is a big investment to produce a top quality product and actually do small production runs. What you guys say or commit to here will determine if this will happen. All that said is there any interest in having made in the USA by American's classic Mack R Model interiors? 3 Quote Link to comment Share on other sites More sharing options...
david wild Posted July 8, 2020 Share Posted July 8, 2020 I will buy and do you make anything for the CH like something nicer than the stock Mack stuff, Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 8, 2020 Author Share Posted July 8, 2020 19 minutes ago, david wild said: I will buy and do you make anything for the CH like something nicer than the stock Mack stuff, Just starting up and the R model I have patterns for. Other interiors I would have to see a few photos and get an old interior to work from. First is the R model. Quote Link to comment Share on other sites More sharing options...
david wild Posted July 8, 2020 Share Posted July 8, 2020 well I honestly believe you better have some spare time because I know lot of people who all have looked for custom interiors for the RD, Daycab co. does everybody but Mack, I would expect you will be real popular. Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 8, 2020 Author Share Posted July 8, 2020 20 minutes ago, david wild said: well I honestly believe you better have some spare time because I know lot of people who all have looked for custom interiors for the RD, Daycab co. does everybody but Mack, I would expect you will be real popular. I talked to the Daycab company recently and they Only do Peterbilt, Kenworth and Western Star. Anywhere between $1500-2500. No Mack... I am a Mack guy and don't really have interest in what they do so all is good. I am just trying to figure out how popular producing interiors for 20 year old plus truck will be. Machinery cost $$ and have work to pay for it is nice to know before hand. 1 Quote Link to comment Share on other sites More sharing options...
Quickfarms Posted July 8, 2020 Share Posted July 8, 2020 Is the headliner the full headliner or is it meant to use the plastic shelf in the front? Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 8, 2020 Author Share Posted July 8, 2020 11 minutes ago, Quickfarms said: Is the headliner the full headliner or is it meant to use the plastic shelf in the front? Can make it ether way, long or short! It will not be the preformed plastic insert. The backer is plastic instead of cardboard. Just have to screw or Ultra High Bond 3M double side tape it in. Using the plastic backer works great for two reasons, it does not distort with moisture and tape sticks to it real good. It is also more expensive than cardboard. 2 Quote Link to comment Share on other sites More sharing options...
david wild Posted July 9, 2020 Share Posted July 9, 2020 Pennies more for quality product is a no a brainer, even if I could get door panels that look like the rawhide would be great but they all use the 1 big window ?? Quote Link to comment Share on other sites More sharing options...
Dirtymilkman Posted July 9, 2020 Share Posted July 9, 2020 These guys in Australia build them, but kinda pricey. TYLDEN HERITAGE Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 9, 2020 Author Share Posted July 9, 2020 (edited) 1 hour ago, Dirtymilkman said: These guys in Australia build them, but kinda pricey. TYLDEN HERITAGE Yes I know that but I am talking about the USA and $1500 for a set. Most things can be gotten from somewhere if you want to pay the price then add shipping. Then have a problem and try and return it, LOL. Add that together and it is really pricey and far more than I am talking by at least twice the $$$$. Besides the AUS drive on the other side of the road, don't know if that would make a big difference. It would in kick panels and carpet. I got Superliner front fender flares from AUS years ago. Paid $350 for the parts and $600 for shipping because of dimensional weight, actual weight was 12 pounds. If that is any indication shipping to the USA would be over $1000 for an interior kit now. Shipper will hits you up for the difference once it is delivered to you! Really just asking if there was an interest if I started making kits to justify the expense of the equipment. I'm looking for customers, Ya Know Edited July 9, 2020 by AZB755V8 Quote Link to comment Share on other sites More sharing options...
880joe Posted July 9, 2020 Share Posted July 9, 2020 I would buy one and know another guy that said he would also Quote Link to comment Share on other sites More sharing options...
david wild Posted July 10, 2020 Share Posted July 10, 2020 Get Barry to sell through Watts Quote Link to comment Share on other sites More sharing options...
Popular Post AZB755V8 Posted July 10, 2020 Author Popular Post Share Posted July 10, 2020 (edited) 1 hour ago, david wild said: Get Barry to sell through Watts Talked to Barry before posting this thread. We can work out something. He said that I would do good at the East Coast shows with guys seeing a kit in person. So that means I got to take the Superliner on tour when shows start to happen again. Should have the bunk on it by then, good place to put the interior kits to transport & sell. Those are the $950 fender flairs I got from Australia. Nice but shipping cost was outrageous. Edited July 10, 2020 by AZB755V8 4 1 Quote Link to comment Share on other sites More sharing options...
terry Posted July 10, 2020 Share Posted July 10, 2020 beautiful truck!!👍👍 terry Quote Link to comment Share on other sites More sharing options...
Dirtymilkman Posted July 10, 2020 Share Posted July 10, 2020 Sharp superliner! Love the colors Quote Link to comment Share on other sites More sharing options...
BGarofalo Posted July 10, 2020 Share Posted July 10, 2020 You can sign me up for a R model kit. I second the motion for a CH/CL kit too. Quote Link to comment Share on other sites More sharing options...
761 Brock Posted July 11, 2020 Share Posted July 11, 2020 since the panels are basically the same, maybe possible to do up a 700 series interior kit for Brockway. I know I'd be interested in a kit.........I'll try to post pics of what they look like, unless someone beats me to the punch.............. Quote Link to comment Share on other sites More sharing options...
Quickfarms Posted July 11, 2020 Share Posted July 11, 2020 I am interested in a kit for my 1975 Mack.What can be done about the dash? I have a nice used one to install but I think it will look bad with a truly new interior. Quote Link to comment Share on other sites More sharing options...
david wild Posted July 11, 2020 Share Posted July 11, 2020 I would invest and I'm sure there are others, no one builds anything to customize Macks chrome do dads and crap mean nothing, but custom interiors are the bomb, I believe you will look back at your hesitation and laugh when you are buried in back orders, if you need investors to cover start up and want silent partners say the word. Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 11, 2020 Author Share Posted July 11, 2020 3 hours ago, Quickfarms said: I am interested in a kit for my 1975 Mack. What can be done about the dash? I have a nice used one to install but I think it will look bad with a truly new interior. Want color is your dash? I have a grey that will match it better than anything from the factory. There are some good spray on dye colors to freshen up any dash. I have to see but the material I use maybe can be glued to an existing dash with a little heating & stretching. Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 11, 2020 Author Share Posted July 11, 2020 10 hours ago, 761 Brock said: since the panels are basically the same, maybe possible to do up a 700 series interior kit for Brockway. I know I'd be interested in a kit.........I'll try to post pics of what they look like, unless someone beats me to the punch.............. Don't think it would be that hard if I had templates. Was it the same cab as an R model? Quote Link to comment Share on other sites More sharing options...
AZB755V8 Posted July 11, 2020 Author Share Posted July 11, 2020 1 hour ago, david wild said: I would invest and I'm sure there are others, no one builds anything to customize Macks chrome do dads and crap mean nothing, but custom interiors are the bomb, I believe you will look back at your hesitation and laugh when you are buried in back orders, if you need investors to cover start up and want silent partners say the word. I'm not into do-dads or Whitney mail order ether. I do like chrome just not those big bumpers. I could do some nice things in stitching for interiors though. I don't do seats but can supply the stitched material to match the interior. I am working on two companies to drum up work not related to interior kits. If one of them comes though I am going to take the plunge. 1 Quote Link to comment Share on other sites More sharing options...
david wild Posted July 11, 2020 Share Posted July 11, 2020 If you have the talent to make custom interiors I would leap at the chance I do not have the skill to do so and admire the work from those that do, please go forward I will be customer. Quote Link to comment Share on other sites More sharing options...
Quickfarms Posted July 11, 2020 Share Posted July 11, 2020 Want color is your dash? I have a grey that will match it better than anything from the factory. There are some good spray on dye colors to freshen up any dash. I have to see but the material I use maybe can be glued to an existing dash with a little heating & stretching. My dash is tanCan you send me some pictures of what you have Quote Link to comment Share on other sites More sharing options...
hicrop10 Posted July 12, 2020 Share Posted July 12, 2020 I would also like to see what you have for the dash,mine is tan also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.