Popular Post teched Posted July 17, 2020 Popular Post Share Posted July 17, 2020 Greetings everyone! Hope all are staying well. I have been looking around for a B-Model Project for a while. I have a 1998 Midliner with a 26' Van body on it that runs great but, honestly is its kind of ugly and saw a picture of a B61 on a Midliner chassis. I would like to build a small camper behind the cab and make the rest of the body a ramp truck. Looking for a cab and nose. I have a line on a couple in the area and trying to set up a time to check them out. Looking for something a couples hours away from Forestport, NY. I have attached a picture of my box truck and a picture I found of a Ford Ramp truck...envision Ford Cab swapped out with a B-Model cab and the sleeper raised up to 7' and a 36" cab over bunk. Well at least that my dream. Thanks, and keep saving the old girls. 4 Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/ Share on other sites More sharing options...
yarnall Posted July 17, 2020 Share Posted July 17, 2020 Welcome to the forum and good luck in your search. Mike. Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456032 Share on other sites More sharing options...
Maddog13407 Posted July 17, 2020 Share Posted July 17, 2020 not far from me..... but god oh why god would you ever pick a midliner to build something on. chassis parts are beyond unobtainable and if it has juice brakes or air over juice they are junk. worked on many and a few with air leaks and parts are non exhistent. youd be better off finding parts for a 60 year old B model 1 Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456039 Share on other sites More sharing options...
teched Posted July 18, 2020 Author Share Posted July 18, 2020 I know they have there issues but it was cheap and ran /drove good. Its full air brakes. I know they are metric air lines and that can be a problem. I've got $1800 in and I figure the box is worth $600. I've got a guy who will buy the truck without the box for $1500. I haven't completely committed to using the truck. I like the long wheelbase but its a class 7 and I don't have a CDL. I thought I would throw a B model on it and register as a B. If I found a decent running diesel B for $2500 I would Probably sell the Midliner and look for a 5th wheel trailer to pull my stuff with. Cool to see Mack man near me. Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456100 Share on other sites More sharing options...
Maddog13407 Posted July 18, 2020 Share Posted July 18, 2020 historic plates in NY dont require a CDL Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456103 Share on other sites More sharing options...
j hancock Posted July 19, 2020 Share Posted July 19, 2020 Have fun with your project! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456162 Share on other sites More sharing options...
teched Posted July 20, 2020 Author Share Posted July 20, 2020 On 7/17/2020 at 10:27 PM, Maddog13407 said: historic plates in NY dont require a CDL Would like to run Historical Plates, but I need a long wheelbase if I plan on using it for a ramp truck. I could buy a tractor but you cant haul a trailer with historical plates. Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456237 Share on other sites More sharing options...
mrsmackpaul Posted July 20, 2020 Share Posted July 20, 2020 I reckon you can still get parts for them pretty easy, just not in the states thats all That to some might be a drama but most of us have smart phones and credit cards so it's not the big drama and is only a click or two and a week or so wait to get stuff from the other side of the world The midliner( with out the bonnet or hood as you blokes call them ) are pretty much the same truck and cab as the coe midliner the rest of the world know about So dont throw the towel in just yet Paul Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456270 Share on other sites More sharing options...
Maddog13407 Posted July 21, 2020 Share Posted July 21, 2020 lots of misinformaton here...... depends on insurance whether you can haul a trailer or not, NYS has nothing to do with it Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456304 Share on other sites More sharing options...
teched Posted July 22, 2020 Author Share Posted July 22, 2020 Interesting...I know that my friends have a 1972 Chevy P.U. that they wanted to tow their 1972 15' Scotty camper with to shows and the DMV told them they could not tow with Historical plates and needed to get passenger or commercial plates. I don't know who they have for insurance. I spoke with a lady at the DMV the first day they opened up amid the Corona shutdown. About the "Personal Use Exemption" for a CDL licence. She was very nice( I know weird) She could not explain it to me and asked her supervisor, who could not explain it, and gave me a number to another office, who did not answer. I feel its a clause that they don't want people to know about due to people hauling 20 ton of stone and telling the cop its for my driveway. She was aware of the R endorsement to drive a Recreational Vehicle over 26001 GVWR. Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456389 Share on other sites More sharing options...
Quickfarms Posted July 22, 2020 Share Posted July 22, 2020 My advice is you need to read the actual vehicle code and not rely on what DMV says or publishes in there manuals.If the vehicle code supports what you are doing then you should keep copies of that section(s) in the vehicle and make them available to the LEO if you get pulled over. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456390 Share on other sites More sharing options...
teched Posted July 22, 2020 Author Share Posted July 22, 2020 On 7/20/2020 at 4:51 PM, mrsmackpaul said: I reckon you can still get parts for them pretty easy, just not in the states thats all That to some might be a drama but most of us have smart phones and credit cards so it's not the big drama and is only a click or two and a week or so wait to get stuff from the other side of the world The midliner( with out the bonnet or hood as you blokes call them ) are pretty much the same truck and cab as the coe midliner the rest of the world know about So dont throw the towel in just yet Paul Thanks Paul, I'm not totally commented to the Midliner chassis, but it was cheep and I could use the storage box. I seen a few of these trucks sitting around. I spoke with someone who works on these and said the engines are great! And like you said just order your airlines off the Web because they are metric fittings. When I first looked at the truck it would crank fast enough to fire, so I ordered a starter off the internet for $100 shipping included and it worked perfect! The frames have a tendency to be prone to rust/ delamination post 1996. Also thought about a school bus frame, but couldn't find one as cheap as this was and there all automatics. Not too keen on the automatics. Quote Link to comment https://www.bigmacktrucks.com/topic/63348-hello-from-forestport-ny/#findComment-456391 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.