Plowboy911 Posted July 25, 2020 Share Posted July 25, 2020 Dash intermittently loses power, gauges fall and alarm goes on even showing seatbelt light. Harness is good on cluster, ground wire is rerouted on terminal 35 but when I wiggle wire 4 dash goes on n off and it seems to be the fuel gauge wire as that gauge jumps up n down. Question is can that one wire if not making a good contact make the whole cluster do this and seem like a ground issue or is my cluster hooped? Quote Link to comment https://www.bigmacktrucks.com/topic/63460-02-vision-dash-cluster/ Share on other sites More sharing options...
Plowboy911 Posted July 25, 2020 Author Share Posted July 25, 2020 Anyone? Any suggestions? Quote Link to comment https://www.bigmacktrucks.com/topic/63460-02-vision-dash-cluster/#findComment-456678 Share on other sites More sharing options...
880joe Posted July 26, 2020 Share Posted July 26, 2020 I have an 01 doing the same thing anyone know where the alarm buzzer is located so I can unhook it Quote Link to comment https://www.bigmacktrucks.com/topic/63460-02-vision-dash-cluster/#findComment-456733 Share on other sites More sharing options...
Plowboy911 Posted July 28, 2020 Author Share Posted July 28, 2020 Well did what I could with the connector on cluster, all grounds seem to have continuity, I cleaned all grounds and posts on batteries. Ordered a new cluster and see if the $1500 was worth it. Maybe this prob or topic has been beat to death but joined this forum for advice and seems to be a lack of. Maybe shoulda bought a Pete. Quote Link to comment https://www.bigmacktrucks.com/topic/63460-02-vision-dash-cluster/#findComment-456923 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.