h67st Posted October 20, 2020 Share Posted October 20, 2020 I'm going to need a full gasket set (not head gaskets, but everything else); does anyone know where to get one? I was hoping to get a decent price (I know, good luck). Also need a water pump and air compressor, I can get these rebuilt but just checking to see if you have any sources for new/rebuilt ones. Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/ Share on other sites More sharing options...
Freightrain Posted October 20, 2020 Share Posted October 20, 2020 I'd have to look to see if I kept the part number from the gasket kit for my 237 when I pulled the heads off. It was a complete kit and everything from the heads down should be the same. I got it off Ebay, it was a Felpro kit. I had my air compressor rebuilt about 17 yrs ago at a place in Southern Ohio(of rt 36). Not sure they are still around. It was $500, but I had it back in 3 days. 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462709 Share on other sites More sharing options...
alex g Posted October 20, 2020 Share Posted October 20, 2020 Might have a new water pump. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462717 Share on other sites More sharing options...
yarnall Posted October 21, 2020 Share Posted October 21, 2020 John Chalmers would be a good source. I don’t have his number handy but someone here will. Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462731 Share on other sites More sharing options...
Vladislav Posted October 21, 2020 Share Posted October 21, 2020 PAI supplys the most of gaskets for E6 2V and those are similar to END673 in many cases excepting the head gaskets which utilize steel fire rings. 673 water pump also crosses to many (or the most) later Mack pumps differing in possible locations of small fittings. I suppose the original END673 pump had graphite seal ring but later desings have modern rubber shaft seal. The latter is also avalible from PAI and other suppliers so you could find a used E6 water pump assembly and rebuild it using such seal and greasing the bearings. That's what I'm going to do with my R-model E6-350 pump. 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462752 Share on other sites More sharing options...
h67st Posted October 23, 2020 Author Share Posted October 23, 2020 On 10/20/2020 at 10:22 PM, yarnall said: John Chalmers would be a good source. I don’t have his number handy but someone here will. Yes, I'm checking with John right now. Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462876 Share on other sites More sharing options...
davehummell Posted October 23, 2020 Share Posted October 23, 2020 I have a good air compressor it has the mount for a power steering pump I know it's good because it was on my truck. Make me an offer. Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-462878 Share on other sites More sharing options...
h67st Posted November 25, 2020 Author Share Posted November 25, 2020 My truck has a Tu-Flo 500, I googled the part number (227326) from the tag and found highwayandheavyparts.com had one reman for $480 plus core charge so I bought it. I found one at a Mack dealer also, believe it's a new one but they wanted $1,000 for it. I got the gaskets from Barry and a water pump from John Chalmers. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/64636-673-parts-needed/#findComment-464377 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.