Jump to content

Recommended Posts

Hi

I have a B series that is missing the outer door handles.  The inner handles appear to be intact.  The glass is up so I don't think I can get a coat hanger in there to pull the inner latch.  Any advice on how to get the door open?  I felt around through the opening but couldn't get ahold of anything.

Thanks.

IMG_2685.JPG

Look straight in the large hole and you'll see the square hole the handle goes in. I *think* a 1/4" ratchet extension may fit or find a piece of small square stock that fits. A flat blade screwdriver would work in a pinch if it fits well. Rotate the square part counterclockwise and the door may (should) open. On mine the latch mechanism was blown apart and required removal of the inner door panel.

If push comes to shove, removal of the lock bead and the rear window is another option.

  • Like 1

Depends on the orientation of the handle. Again like the outer handle it would turn ccw. Either push down, or push forward. I have mine attached so to push down.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...