Moparmike Posted December 11, 2020 Share Posted December 11, 2020 Does anyone have the part number for national seal wheel seal I got a seal from mack stemco brand leak same day I put it on and cost 77.00 dollars I have replaced 1 before but can't remember or find the part number Need to order 1 in the am so I can be ready Monday The stemco was hard to get over the mounting area then wouldn't turn once it was on so I know it was going to fail but mack had closed and I was trying to work Thank you for your help Quote Link to comment Share on other sites More sharing options...
Moparmike Posted December 11, 2020 Author Share Posted December 11, 2020 44 rears Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 14, 2020 Share Posted December 14, 2020 check out a 370022A or 380022A seal.... see if thats the cross.... Quote Link to comment Share on other sites More sharing options...
terry Posted December 14, 2020 Share Posted December 14, 2020 What did you use to drive the seal in with? terry Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 14, 2020 Share Posted December 14, 2020 I forgot to ask if you have mack rears,, also, was there a wear ring on the spindle and you installed 393-0173 stemco, that is why it was tight... the wear ring needs to come off, buff the spindle and if it is not damaged you can use the stemco seal, if it ha light damage, the 2 piece stemco seal kit is what you need... there are specific drivers to do the installs, can you post the stemco seal you used, I have a chart and can cross it that way.... Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted December 14, 2020 Share Posted December 14, 2020 And dont cut the old wear ring off with a chisel 2 Quote glenn akers Link to comment Share on other sites More sharing options...
Joey Mack Posted December 15, 2020 Share Posted December 15, 2020 exactly!!!! Quote Link to comment Share on other sites More sharing options...
MACKS Posted December 15, 2020 Share Posted December 15, 2020 36 minutes ago, theakerstwo said: And dont cut the old wear ring off with a chisel Just heat it up a little and it will slide right off same to install.. 2 Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 23, 2020 Share Posted December 23, 2020 Hey there, I was raised in East Islip, Just curious were you are... We moved out in 1981....anyway, just thinkin about the old days.... Jojo. Merry Christmas! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.