Jump to content

Recommended Posts

These guys have a 90 mack R model with an E6 and a 5 speed trans. Long frame, it's a city truck which had a vac tank set up on it. They were driving it until the battery box rusted out and the batteries fell out and tore the cable loose and they just retired it. They want $500 for it, so I'm probably going to go get it. I set a stool next to it with a battery and it fired right up and runs good. It's not bad, the cab is perfect, the interior is rough which is always the case in old city drivers. Just the 5 speed tranny is a big disadvantage. I'm likely to just steal the cab off it and scrap it. 

  • Like 2
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/
Share on other sites

5 hours ago, deadparrot said:

good luck on your project. photos or its just gossip :) 

Next few days if I can get photos from my phone to the computer. If it's still a major fight, I can find another computer. What would you like to see?

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-467581
Share on other sites

I'll get some pics up. No, it's not mint and ready to go cross country. But it's not bad either. It def needs some work but it runs and moves. They let some stuff go for a while. The clutch doesn't feel terrific and it's a city truck. You aren't getting on the interstate in something like this. Needs a battery box and a couple E31's. I'll make cables for it. The cab, glass and pump is worth the money.  This would actually be a good export truck. Afghanistan or Sur America. 

Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-467597
Share on other sites

6 hours ago, Miami Cossack said:

I'll get some pics up. No, it's not mint and ready to go cross country. But it's not bad either. It def needs some work but it runs and moves. They let some stuff go for a while. The clutch doesn't feel terrific and it's a city truck. You aren't getting on the interstate in something like this. Needs a battery box and a couple E31's. I'll make cables for it. The cab, glass and pump is worth the money.  This would actually be a good export truck. Afghanistan or Sur America. 

No such thing as a good export truck. They have enough of our old Macks. 

  • Like 2
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-467625
Share on other sites

That and the "scrapping frenzy" that went on a few years ago when prices were up has really depleted used and rebuildable parts available to keep older trucks operational. 

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-467631
Share on other sites

Amen on the scrapping B.S. Obama's "cash for clunkers" was one program.. I have had many "core" parts over the years, But can't find anyone who will buy them to re-build them. So I guess I will hold on to them from now on, and look for rebuild kits myself. 

Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-467633
Share on other sites

On 1/25/2021 at 7:12 AM, Rob said:

That and the "scrapping frenzy" that went on a few years ago when prices were up has really depleted used and rebuildable parts available to keep older trucks operational. 

There is scrapping and recycling yard in Elmsford NY ( Brookfield Resource Management) that scraps lots of old trucks that seem to have life left in them. Many are Macks from municipalities etc. They used to export some but I don't think they sell the whole trucks any more and not sure what happens to the parts or if they just crush them. I personally don't mind the export of old trucks because at least they have a higher chance of another life than being crushed. We can't save them all but it would be good to know that the scrapped ones keep others going here.

  • Like 2
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-468054
Share on other sites

I send a lot of buses to a third party who send them to Laos and Brazil. Buses literally never retire. Many will go ten years or longer without break linings. The concept of DOT/MOT or PM is a campfire laugh to them. But I spent many years in Somalia and those people never discard anything, especially a truck. Even if it blows up, they will make an Ox cart from the parts

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-468321
Share on other sites

The batteries and battery box are here. That's just under $500. I spent a couple days when I could finder time fixing about 15 air leaks. The seat bottom is $107, that's on the way. I'll start on the A/C when I get some time, front tyres and paint it. This used to be yellow. The guy just wants new trucks. Image means a lot. These Are really well maintained trucks compared to some of the stuff I see. The A/C doesn't work and a lot of air leaks. If the batteries weren't dragging on the highway, it would probably still be doing septic suck-outs. 

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/65657-1990-r-model/#findComment-468868
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...