jab002 Posted May 28, 2021 Share Posted May 28, 2021 2000 CH613, when marker lights or headlights turned on gauges max out, turn signal lights (on dash) come on dim and fan clutch wont engage. Any one had this issue? Bad ground some where? Fuses checked out. TIA Quote Link to comment Share on other sites More sharing options...
Hayseed Posted May 28, 2021 Share Posted May 28, 2021 Start Pulling Fuses out one at a Time, until you isolate which circuit the gremlin is In..maybe.. Quote "Be who you are and say what you feel...Because those that matter...don't mind...And those that mind....don't matter." - Link to comment Share on other sites More sharing options...
mrsmackpaul Posted May 29, 2021 Share Posted May 29, 2021 Ground fault Im thinking Paul Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 29, 2021 Share Posted May 29, 2021 Grounds.... Pull cluster and clean the ground bolt to the left. It is a 6mm bolt, (10mm socket) If it has the star washer, remove it, buff the paint clean and scrape any heat shrink glue from the eyelets. Do the same next to the fuse panel on the right side. Then clean the ground on the left side of the engine block in front of the starter, also clean the frame ground bolt that is across from the block ground. There will be a #4 wire going from the block to the frame there. Then clean the ground breaker on the firewall that is next to the starter relay.. Good luck, Jojo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.