vanscottbuilders Posted October 1, 2009 Share Posted October 1, 2009 Jim,Did you use the front axle from the school bus, ordid you adapt the disc brakes and hubs to the Mack axle?Any issues with whatever you did?I'm pretty envious!!Paul Van Scott Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41254 Share on other sites More sharing options...
LocomotiveBreath Posted October 2, 2009 Share Posted October 2, 2009 There ya go LocomotivebreathDid you make any progress this week JimDuh , I guess I should have looked a little closer. Been down with the flu all week and am doing good just to function at all. The truck is really shaping up nicely though. Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41260 Share on other sites More sharing options...
phantom309 Posted October 2, 2009 Author Share Posted October 2, 2009 Paul, We used the bus axle. The front springs are from the Mack but we removed a few leafs. We haven't figured out what we're going to do about shocks yet. We haven't had time to work on anything so far this week but I'm hoping we'll get some time tomorrow. I'll be sure to post some pictures as soon as we make a little progress.Jim Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41268 Share on other sites More sharing options...
Ironman Posted October 4, 2009 Share Posted October 4, 2009 Well I feel like we're making progress now. The sandblasting is all done and the chassis is painted. We used Magnet brand Chassis Saver paint. http://www.magnetpaints.com/underbody.asp I've never used POR paint but I think this stuff is similar. It's a little different than regular paint to work with but it's as tough as nails. Once it's cured you can barely scratch it.We're finally getting back to working on the Mack. We went to a wrecking yard and got some seats and a console from a 95 Jeep Grand Cherokee. As you can see from the first picture the size is similar to the Mack seat. We had to build pedestals to raise everything to the proper height. We were able to adapt the automatic shifter from the bus into the console, it'll look fine once we make a bezel for it.We also installed a new radio with a GPS, Bluetooth and satellite radio. We wanted to mount it a bit higher but the motor from the electric wipers was in the way. Soon we'll be able to start on the paint and body work.Here's a picture of the frame with the engine installed.I'm back from visiting Jim's shop. Didn't get to meet Winston or Ruby but I did get to see his truck up close.I have to tell yeah.. pictures don't do it Justis... After the frame got sandblasted and painted. All I can say is INCREDIBLE FINISH The frame is Smooth and shiny. Looks great. and while I was there. I got to sit in the new driver's seat. Those Jeep seats are gonna be perfect in the truck.Thanks for the hospitality Jim. I luv'd the tour of your shop. Your livin the dream man. You guys have built an great facility there. Quote GLENNGRANDKIDS :Gods little gift to us for not killing our kids while they were growing upAll I want, is just to be luv'd and for my Check Engine light to go out on my Volvo. Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41379 Share on other sites More sharing options...
phantom309 Posted October 8, 2009 Author Share Posted October 8, 2009 We got a little more done this week. We modified the dash module from the bus a little and it fits into the Mack dash. The nice part is that this dash just plugs right in to the bus wire harness. We had our doubts about the rectangular guage faces but I think it's going to look fine once we finish fitting the front panel.We also built some fuel tanks.We borrowed an idea that I think Mack used to use on their tanks and added a small catch basin to the bottom. That setup will allow us to draw fuel almost to the bottom. We'll put a drain valve on the smaller fitting.In this picture you can see the tanks installed ahead of the drives. We used a couple of the fire hose caps for filler caps. Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41569 Share on other sites More sharing options...
Ironman Posted October 8, 2009 Share Posted October 8, 2009 Nice work guys Dash looks great, nice idea on the fuel tanks. Quote GLENNGRANDKIDS :Gods little gift to us for not killing our kids while they were growing upAll I want, is just to be luv'd and for my Check Engine light to go out on my Volvo. Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41571 Share on other sites More sharing options...
Freightrain Posted October 8, 2009 Share Posted October 8, 2009 Dash is looking great. Not out of place at all.My truck needs fuel tank work and would LOVE to make a set of alum diamond plate tanks! That would look COOL!! Oh well, maybe someday. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41590 Share on other sites More sharing options...
phantom309 Posted October 10, 2009 Author Share Posted October 10, 2009 We built a battery box today. The batteries were originally kept under the passengers seat but there was nothing behind the dress panel under the cab so we made a box to fit behind it and put a door on the panel. We haven't installed the latch hardware yet. We're going to make another box like it for the other side. We'll use that one for tool storage etc. Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41657 Share on other sites More sharing options...
Freightrain Posted October 10, 2009 Share Posted October 10, 2009 Jim...that thing is turning out AWESOME!! I can't wait to see it in person!!!! Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41662 Share on other sites More sharing options...
Ironman Posted October 10, 2009 Share Posted October 10, 2009 Increadable craftsmanship guys It is gonna look awesome when it's done Quote GLENNGRANDKIDS :Gods little gift to us for not killing our kids while they were growing upAll I want, is just to be luv'd and for my Check Engine light to go out on my Volvo. Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-41700 Share on other sites More sharing options...
phantom309 Posted November 22, 2009 Author Share Posted November 22, 2009 Boy, this project has been moving slow. We just haven't had much time available for working on it. I'm happy to say we finally painted the cab. That's all we've done so far but I'm hoping to start painting the rest soon. We stuck with the plan and painted it to match the race car.Here's a picture of the race car beside the truck...We painted the interior a creamy beige color that should go well with the seats we've got.I really like the Mack green but I think it would have clashed with the blue.Here's the cab beside the chassis...We had to modify the firewall and doghouse to make room for the heater and air conditioner. We actually used a stainless steel kitchen sink for the doghouse.I'll post more as we go along.Jim Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-43676 Share on other sites More sharing options...
Ironman Posted November 23, 2009 Share Posted November 23, 2009 Beautiful! Just beautiful. Nice workNice shine. I luv your dog house idea.Who would of thought of using the kitchen sink. That looks perfect. I would have never known unless you told me.The interior looks great. And the blue looks perfect. I know on my last visit, your attention to detail has paid off. Quote GLENNGRANDKIDS :Gods little gift to us for not killing our kids while they were growing upAll I want, is just to be luv'd and for my Check Engine light to go out on my Volvo. Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-43697 Share on other sites More sharing options...
Freightrain Posted November 23, 2009 Share Posted November 23, 2009 Now you can OFFICIALLY say you brought EVERYTHING to the track, including the kitchen sink That color is great, the interior looks good too! The Mack green might not have been too terrible, but being metallic too it likely woulda looked kinda odd. I'm SOOOOOO jealous! Get that finished up so you can start on mine!!!!!!! Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-43709 Share on other sites More sharing options...
phantom309 Posted January 17, 2010 Author Share Posted January 17, 2010 Time for an update. Unfortunately we haven't had much time to work on the Mack but we have managed to make a little headway. We covered the floor and firewall with some sound deadener.Rather than try to carpet the complex shape of the doghouse we decided to make a fiberglass cover for it.We made the cover by molding a sheet of lead around the doghouse to get the shape.We then covered the lead with fiberglass.After a few layer of fiberglass and a little body filler it's almost ready for paint. The plan is to install the carpet then put the cover on. As I mentioned earlier, the doghouse is actually a kitchen sink but I think it'll look fine when it's done.We've also been plugging away at the paint and body work so I think we'll be able to start re-assembling things soon.Jim Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47841 Share on other sites More sharing options...
Ironman Posted January 17, 2010 Share Posted January 17, 2010 Looks real good JimGood idea on the fiberglass cover for the doghouse. looks real good.Not to steer too far off topic but was that the crate engine in the back ground for your new Plymouth racer? Quote GLENNGRANDKIDS :Gods little gift to us for not killing our kids while they were growing upAll I want, is just to be luv'd and for my Check Engine light to go out on my Volvo. Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47845 Share on other sites More sharing options...
mackcl96 Posted January 18, 2010 Share Posted January 18, 2010 Quote Thanks for hearing me out.You can have the soap box now---------JIM Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47849 Share on other sites More sharing options...
phantom309 Posted January 18, 2010 Author Share Posted January 18, 2010 Not to steer too far off topic but was that the crate engine in the back ground for your new Plymouth racer?You're close, the engine is going into a 61 Pontiac. It's a 348 Chevy engine which is a smaller version of the 409, although this particular 348 happens to be stroked to 437ci.Here's the car it's going into. It HAS TO be ready to race in time for the big Gasser race in Thompson Ohio on the first weekend in June. The car looks OK but it needs a fair bit of work to make it race ready. We can't even start on it until the Mack gets done.Oh and Larry, (Freightrain) I know what you're wondering,,, and no this car won't have a 4 speed, it's got a 350 automatic. Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47856 Share on other sites More sharing options...
thermodynediesel Posted January 18, 2010 Share Posted January 18, 2010 Looks GREAT,That will be an awsome truck when done. What brand of sound deadener did you use ? Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47861 Share on other sites More sharing options...
Freightrain Posted January 18, 2010 Share Posted January 18, 2010 I guess you have to put a W motor in that Pontiac..................but ohhhhh, what a pity.Not sure about the gasser show as it's moved to Norwalk. Is Thompson going to have their own show too? Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47867 Share on other sites More sharing options...
phantom309 Posted January 18, 2010 Author Share Posted January 18, 2010 Looks GREAT,That will be an awsome truck when done. What brand of sound deadener did you use ?We use a product called Hushmat. It seems to be about the same as the more common Dynamat except that this stuff is cheaper. It was also on sale when we got it but it's still pretty pricey. We really want the truck to be quiet so we've also got some padding that will go under the carpet and we're also going to use boxliner as a sort of undercoating under the cab.Larry, That's a Canadian Pontiac. These cars only came with Chevrolet engines. This particular car came with an inline six cylinder but the 348 was an option. Canadian Pontiacs were built at the Chevy plant and used a Chevrolet frame and drivetrain. These cars are lighter than a regular US built Pontiac, they're basically a Chevy with Pontiac styled sheet metal.The Gasser Magazine Gasser Reunion has been moved to Norwalk but Thompson is going to go ahead with their own Gasser Reunion on the regular first weekend in June date. It sounds like most of the Gasser crowd will be at Thompson and I'm sure many will also go to Norwalk.Here's the event poster... Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47871 Share on other sites More sharing options...
Freightrain Posted January 18, 2010 Share Posted January 18, 2010 Canadian Pontiac Eh? LOL!! Ya, buddy has a '68(or '69 I forget)Beaumont in his garage(Canadian Chevelle).Hmmm, guess I'll be going to Thompson again(weather permitting). Hate to miss out on YOUR B model this year Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-47881 Share on other sites More sharing options...
phantom309 Posted January 24, 2010 Author Share Posted January 24, 2010 We put the cab on the frame and the rad's in place. We coated the back and underside of the cab with a boxliner type of coating.Then we added more sound deadener. It should be fairly quiet when it's done.It's nice to see this thing finally going together. Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-48404 Share on other sites More sharing options...
ThaddeusW Posted January 24, 2010 Share Posted January 24, 2010 All i can say is wow. You guys are doing a beautiful job on the truck. Cant wait to see it all finished.You also are really giving me and I am sure others some direction for future restoration projects. I like the detail work you did on the cab with the insulation and bed liner. Quote -Thad What America needs is less bull and more Bulldog! Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-48409 Share on other sites More sharing options...
Freightrain Posted January 25, 2010 Share Posted January 25, 2010 Insulation? Sound deadener?? What?? You want to actually be able to talk while traveling? Huh? Come on...........LOL!I can't WAIT to see it in person! Of course, they'll park me in the back 40 while YOU get the front row spot at Thompson. (unlike last year). Pete was takin care of me Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-48483 Share on other sites More sharing options...
Trenton Posted January 25, 2010 Share Posted January 25, 2010 WOW! Just plain beautiful work. Can you show more pictures of the hitch please?Great Work.Trenton Quote Link to comment https://www.bigmacktrucks.com/topic/6853-b-model-car-hauler/page/4/#findComment-48487 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.