Jump to content

Recommended Posts

yes... the rear axle wont allow 5 1/2" OC by 28 spline slacks to fit, unless you buy left side and right side... I just dealt with this on (2) '86 RW 713's..  The issue I found was that the S-cam was too short and the snap ring on the outside of the slack adjuster would not go on...  so I was not able to shim it out...  Jojo

Link to comment
https://www.bigmacktrucks.com/topic/68954-auto-slacks/#findComment-485773
Share on other sites

yes, if your Mack Dealer will help you.. I do not have the part numbers, otherwise I would post them for you...  The issue I found was that the S-cam was too short, coming out of the S-cam housing, and I was unable to shim the slack out to clear and get the outer snapring on..  jojo

Link to comment
https://www.bigmacktrucks.com/topic/68954-auto-slacks/#findComment-485791
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...