Jump to content

Recommended Posts

a couple places..  I hook into the return port on the right side of the block, however another 'Poster' here suggests the port behind the top of the overboard breather.  it is on the right front corner of the engine and has 15/16" hex nut made into the lid. remove the lid and you can get to the small plug in the fuel gallery.. you will need to use 3" long male pipe union to reach out enough to hook a gauge to..   60+ PSI....Jojo

Edited by Joey Mack
More content needed
Link to comment
https://www.bigmacktrucks.com/topic/68970-fuel-pressure/#findComment-485806
Share on other sites

if you have the pressure sensor on the regulator,  take the sensor out,  linstall a 't'  then put the sensor back in the 't' and hook a gauge to the open port..  1/4" NPT.. I have one made up with a long hose, so I can put it in the window and hang it on the sun visor so I can drive the truck and test it..  welcome aboard... jojo

Link to comment
https://www.bigmacktrucks.com/topic/68970-fuel-pressure/#findComment-485814
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...