mechohaulic Posted March 13, 2022 Share Posted March 13, 2022 2 hours ago, JoeH said: The reason your mechanic won't do it again is that these engines have a lot of duct work to get to the valve covers. 2 sets of intake pipes, one for intake and one for the tip turbine. They go together like a puzzle. Crankcase breather crossover tube on top of the valve covers, and the valve cover gaskets are a right PITA! Especially if you have a Jake brake. We have had to straighten our valve covers numerous times, we've learned you have to torque them up by the book to keep them from leaking. They deform with the slightest amount of overtorque i found if you put a number of light center punches on the jake spacer both sides it seems to hold the rubber gasket in place better also 1 Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492044 Share on other sites More sharing options...
Joey Mack Posted March 13, 2022 Share Posted March 13, 2022 Home J-37720-C Mack E9, E7, & E6 Roller Lifter & Tappet Holder Kit J-37720-C Mack E9, E7, & E6 Roller Lifter & Tappet Holder Kit This tool retains the roller lifters when removing and installing the camshaft. It works on E-7 EUP (Electronic Unit Pump) and tappets in the Mack E-9, E-7, and E-6 Engines. Includes: J-42425-3 Magnet Cap x16 J-42425-4 Bottom Rod x16 J-37720-5A Top Rod x16 J-37720-6A Grommet Kit x1 J-37720-7A 30" Pouch x1 J-37720-13A Magnet x16 J-37720-14B Instruction Sheet x1 MANUFACTURER SPX/Bosch (OTC Rotunda Kent-Moore Miller) BRAND SPX/Bosch (OTC Rotunda Kent-Moore Miller) STORAGE CODE A-11,A-17 J-37720-C Mack E9, E7, & E6 Roller Lifter & Tappet Holder Kit SKU# J-37720-C California Residents: WARNING 1 Review(s) | Add Your Review You will earn 12 dollars off your next purchase for purchasing this product. Item Condition: new Aftermarket AM-J-37720-C $599.99 OEM J-37720-C $853.22 Ships today! Order now and receive by Tuesday March 15 when selecting UPS Next Day Air $853.22 QTY: ADD TO CART CHECK FOR ALTERNATIVES EMAIL TO A FRIEND Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us! ADDITIONAL OPTIONS & MECHANIC WEAR Mechanic Short Sleeve Moisture Wicking Shop Shirt $32.04 Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492054 Share on other sites More sharing options...
Joey Mack Posted March 13, 2022 Share Posted March 13, 2022 Mechohaulic, I posted this for youre entertainment, jojo Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492055 Share on other sites More sharing options...
theakerstwo Posted March 13, 2022 Share Posted March 13, 2022 On a B and C model cummins we used 12 extendable pocket magnets and tied two together at the top with a rubber band.I used the same thing about 5 years ago on E7 mack. 2 Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492061 Share on other sites More sharing options...
mechohaulic Posted March 13, 2022 Share Posted March 13, 2022 4 hours ago, Joey Mack said: Mechohaulic, I posted this for youre entertainment, jojo entertainment !!! darn i almost didn't make it to my heart pills LOL that's insane . Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492077 Share on other sites More sharing options...
mechohaulic Posted March 13, 2022 Share Posted March 13, 2022 and i thought the shirt was free also for buy the set . Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492079 Share on other sites More sharing options...
Joey Mack Posted March 13, 2022 Share Posted March 13, 2022 no freebie's.. .. i have been buying tools that are copied, and so far they are doing the job correctly. Im glad I know what the right tool looks like.at the least I can see if it the right tool.. jojo Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492083 Share on other sites More sharing options...
Joey Mack Posted March 13, 2022 Share Posted March 13, 2022 I just dropped $2800.00 on a counterbore cutter and the cutter plate and extra carbide's.. jojo Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492084 Share on other sites More sharing options...
mechohaulic Posted March 14, 2022 Share Posted March 14, 2022 5 minutes ago, Joey Mack said: I just dropped $2800.00 on a counterbore cutter and the cutter plate and extra carbide's.. jojo I lucked out few times on tool acquisitions . got a 60 ton 2 speed hyd press for cash owed. brake job on a trailer (OO said he was short on cash before starting) got me a near new 1 in dr air gun CP and a 20 ton portable air jack. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/69364-endt676-interchangeable-with-other-2-valves/page/2/#findComment-492087 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.