Jump to content

Granite not directing air into defroster vents


Go to solution Solved by SLEDOG,

Recommended Posts

Well I’ve had some good luck fixing my 07 granite on this site so here I go again…

Blower works great but not much at defroster vents when called for.

im taking console apart now and was wondering if there is a flapper or something that I need to check and how do I get to it….

 Thanks Sledog 

The mode boxes in those trucks were known for the gears stripping and causing the issue you have..  so basically, you need to suck down the A/C, pinch off the 2 heater hoses at the firewall to remove them, and remove the A/C lines there as well, pull the floor pan around the shifter out, so when you remove the HVAC unit, you can tip it out.  you may need to put the stick in 5th gear for extra room.  Then you do the repair on the bench.  I dont have the bulletin, but I bet someone will post it for you..  Good luck, Jojo

  • Solution

I found it…the rod for the flapper wasn’t attached to the lever for the control knob.

reattached it and all is good.

thanks for response guys.

Sledog

  • Like 2

Yeah Buddy,,,   you dodged a bullet there..  Glad you pulled the cover off before digging in to sucking the A/C and coolant lines and such..  was it the arm and lever right in front when you pulled the cover?  Jojo

Ya Joey it was right behind the control board on the right hand side. It doesn’t look like it popped off by itself…. Probably was swapped with her sister truck and never got hooked back up…. Pretty sure it’s been like that since I’ve owned the truck……

Sledog 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...