RockingJFarms Posted April 7, 2023 Share Posted April 7, 2023 Hi everybody, I have a R685ST with FA352 front end that needs tie rod ends. The ends on it appear to be the rebuildable style. However, I can't find a parts number for the rebuild kit. All I can find is a whole tie rod end (10QH37) but that doesn't match what I have. I attached a photo of the end that I have. My style is like a sleeve that slips on, the 10QH37 is a screw on end. Can anybody help with parts numbers for this tie rod end? Quote Link to comment https://www.bigmacktrucks.com/topic/72696-68-r685-tie-rod-ends/ Share on other sites More sharing options...
mechohaulic Posted April 7, 2023 Share Posted April 7, 2023 challenge to see in picture; that style should also be a thread on two 5/8 ? bolts tighten end to tie rod it self. one side left hand thread other right hand. is the bottom of end have the HD (same a sDM's) cotter pin and screw cap ?? not guarantee if I would call those ends rebuildable vs replaceable. left/ right hand threaded ends allow for adjusting the tow in. Quote Link to comment https://www.bigmacktrucks.com/topic/72696-68-r685-tie-rod-ends/#findComment-528667 Share on other sites More sharing options...
doubleclutchinweasel Posted April 12, 2023 Share Posted April 12, 2023 Not sure if this is the same axle, but it is the same type of end. Do you know the model number of the axle (located on front, passenger's side)? Look through the attached PDF file. Near the end, it actually has dimensions for the ends. If they match yours, you might have somewhere to start from. Front Axle.pdf Quote "Eagles may soar, but weasels don't get sucked into jet engines." Link to comment https://www.bigmacktrucks.com/topic/72696-68-r685-tie-rod-ends/#findComment-529043 Share on other sites More sharing options...
mechohaulic Posted April 12, 2023 Share Posted April 12, 2023 don't remember those being rebuildable. #22 in picture a snap ring ? minds drawing a blank (again). Quote Link to comment https://www.bigmacktrucks.com/topic/72696-68-r685-tie-rod-ends/#findComment-529052 Share on other sites More sharing options...
mechohaulic Posted April 12, 2023 Share Posted April 12, 2023 drag links had a rebuild kit /spring: two 1/2 moon caps =one having pin to go on spring end, some where a kit with large snap ring ; thought that was HD tie rod ends? Quote Link to comment https://www.bigmacktrucks.com/topic/72696-68-r685-tie-rod-ends/#findComment-529054 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.