mrsmackpaul Posted June 28 Share Posted June 28 1 hour ago, mowerman said: Wife cries like mad every time I need a hand with anything especially heavy although she did help me take it off around 20 years ago This is a world wide deal, oh the performance when help is requested from the Princess LOL Paul 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554423 Share on other sites More sharing options...
mowerman Posted June 28 Author Share Posted June 28 41 minutes ago, mrsmackpaul said: This is a world wide deal, oh the performance when help is requested from the Princess LOL Paul The honeymoon is definitely long gone all I get is RAW RAW RAW!!!!!!! But always clean clothes and hot meals 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554425 Share on other sites More sharing options...
Vladislav Posted June 28 Share Posted June 28 Although women can make plenty of hard works when they want to the hood is too heavy for her hands if you plan her to accompony yourself. I would better ask those construction guys to spend 5 minutes after their shift to pull the hood off the truck and bring it into the garage. And give them a 6 pack. I don't know how does the such work in your country but here it's pretty common. If the crue is construction workers you usually may offer a small fee to make a certain amount of additional work done. And if you need a 3 minutes help it's in the most cases enough just to ask and 3-4 men comes with no negative and no pretensions for any pay back. By the word do you plan to paint the hood yourself? Or bring it to a paint shop? On my mind you would need to have it off the truck in the both cases. P.S. And good point in having a spare hood is you wouldn't need bothering the truck while tinker with a hood for it. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554427 Share on other sites More sharing options...
Popular Post mrsmackpaul Posted June 28 Popular Post Share Posted June 28 The apprentice yesterday was informing me of his issues with his lady friend A month or so ago he was informing me that after listening to me and wisdom with marriage he is gunna make it all work better for him, he's gunna lay down the rules at the start and life's gunna be great for him Yesterday he informs that during the previous evening he has hit a snag with his plan "She doesn't even make sense when we are having a argument" He goes onto explain "I was heading to Echuca (big town in northern Victoria) with my mate and asked her if she wanted to come for a ride with me and my mate, she said no, we grabbed a meal, bought some stuff and mucked about for a few hours before heading home. She was in a shitty mood when I got home and I don't know why. I tried to explain that she didn't want to come for a ride so whats the problem?" I was trying not to laugh as he went on and on Finally I reached out with my hand and shook his hand and said "welcome to the club" Anyways I imparted some advice on how to repair this situation I wonder what time I'll get the call from the hospital to collect him ha ha ha He really is a nice young bloke but pretty thick at the same time, I guess we all were I have learnt when you bog a farm tractor is not the correct time to ask the Princess to hop in and steer and especially when the chain breaks and it sorts out the glass in the cab window Everything is always to heavy for the Princess to help And she can never just help without taking control I have also learnt it's easier to just take lot longer and do the job on my own Paul 1 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554431 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 That was a hilarious story Paul!!!!!!! And mine goes to the gym and runs every day but when I need a hand RAW RAW RAW and vlad I have to keep moving it to a another area for grinding and sanding the fiberglass and then clean it all up before letting them out because I have little dogs I don’t want them to get sick But thank you so much for the suggestion and yes, that would be fabulous and I’m sure they would be more than willing to give me a hand with it. They’re pretty good guys. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554448 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 Saran wrap I was thinking of that for the odd angle areas while I was going to Road yesterday that might help out considerably, especially for something completely upside down. put a couple of pieces on and chase it with the saran wrap it keep padding it like a dog ha ha I don’t know. I think a crazy shit.when I’m going down the road. … bob Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554467 Share on other sites More sharing options...
tjc transport Posted June 29 Share Posted June 29 the only thing i think of going down the road is "i hope that askwhole dont hit me, and i hope some askwhole don't try to brake check me before i get where i am going. Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554472 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 i mainly worry about triple flammable tankers passing me at 80mph ,,,speeding road bombs,,,bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554476 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 more progress,,,,,gang is doing fabulous work,,especially detail and paul,,,,they got a chick working with them,,,,this chick is a bull,,,,works harder that the men 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554477 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554478 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554479 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 Oh, I forgot to answer somebody’s question. They asked me if I was going to spray the nose myself. Yes, I have a professional body shop spraygun and yes, I am going to paint the whole truck myself piece by piece doors off nose off glass out of it. I’m fixing on, doing the interior first or the roof I bought a bunch of brand new parts from watts anxious to see them all on there brand new marker lights, and an airhorn 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554481 Share on other sites More sharing options...
Vladislav Posted June 29 Share Posted June 29 4 hours ago, mowerman said: Oh, I forgot to answer somebody’s question. They asked me if I was going to spray the nose myself. Yes, I have a professional body shop spraygun and yes, I am going to paint the whole truck myself piece by piece doors off nose off glass out of it. I’m fixing on, doing the interior first or the roof I bought a bunch of brand new parts from watts anxious to see them all on there brand new marker lights, and an airhorn Good plan on that. I guess the result will be fine if you have experience with paint works. The cab isn't really large if you first paint the interior, than the roof, than the cowl and the back wall as separate steps. Doors are much more seen parts but it's easy to spray at them positioned horizontly. So the most dramatic story with paint is the hood. It may also be divided for areas above and below the curved edge along its sides. The progress over the house looks good. But I don't see a girl on a ladder picture. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554504 Share on other sites More sharing options...
The Rubber Duck 006 Posted June 29 Share Posted June 29 If you're going to paint the Ol'girl yourself Bravo....I personally would paint it with Tractor Restoration Paint...I can't remember the brand but Tractor Supply used to sell it and it was great paint Primer and Hardener.... Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554505 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 1 hour ago, Vladislav said: Good plan on that. I guess the result will be fine if you have experience with paint works. The cab isn't really large if you first paint the interior, than the roof, than the cowl and the back wall as separate steps. Doors are much more seen parts but it's easy to spray at them positioned horizontly. So the most dramatic story with paint is the hood. It may also be divided for areas above and below the curved edge along its sides. The progress over the house looks good. But I don't see a girl on a ladder picture. I was off Wednesday didn’t think about taking a picture but ordinarily thier working while I’m working and I don’t ever see them also I’m going to spray the cab in sections also… nose?????? I think I will just start shooting and hope for the best I used to be pretty good but I haven’t done anything in 30 years start getting runs then I’ll know I have to change my strategy remember fine line between orange peel, and sags …… bob Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554512 Share on other sites More sharing options...
mowerman Posted June 29 Author Share Posted June 29 1 hour ago, The Rubber Duck 006 said: If you're going to paint the Ol'girl yourself Bravo....I personally would paint it with Tractor Restoration Paint...I can't remember the brand but Tractor Supply used to sell it and it was great paint Primer and Hardener.... Thanks for that tjc recommended rustoleum machine paint cheap to buy and holds up well probably pretty much same quality Otherwise, I pretty much think everything else is around 200 bucks a gallon for just acrylic enamel never mind polyurethane, or lacquer… bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554514 Share on other sites More sharing options...
Miami Cossack Posted June 30 Share Posted June 30 On 7/22/2023 at 4:34 PM, mowerman said: Thanks bud I plan on it. I’m at the age now. I have to stick my own foot up my ass. But again I spend a lot of hours at work. Half the problem im all wore out. end of the week. Truth! I come home, take a short break, get cooled down then it becomes "tomorrow" 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554521 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 Oh yeah bro I can’t do anything during the week hours are too long. I didn’t do anything today. You can see construction hands got stuff laying all around I just started it let it run a few minutes and then hose it off. It was filthy.from sanding and grinding got tired of seeing it that way…. Haha bud glad I’m not the only one on board with this…. Bob Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554525 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 1 hour ago, Miami Cossack said: Truth! I come home, take a short break, get cooled down then it becomes "tomorrow" Ordinarily couples drinks, dinner and rite to bed 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554526 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 I don’t blame duck for leaving all of that going to shorter hours sometimes it’s just not worth giving up your life I was just talking to the City driver Friday that was telling me he was not willing to give up normal life to run freight all night I did not blame her him … bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554527 Share on other sites More sharing options...
Vladislav Posted June 30 Share Posted June 30 8 hours ago, mowerman said: I was off Wednesday didn’t think about taking a picture but ordinarily thier working while I’m working and I don’t ever see them also I’m going to spray the cab in sections also… nose?????? I think I will just start shooting and hope for the best I used to be pretty good but I haven’t done anything in 30 years start getting runs then I’ll know I have to change my strategy remember fine line between orange peel, and sags …… bob It may worth starting paint works from smaller parts then. What I did with my R was an air cleaner housing first, than two doors, than... etc. So being you I'd complete the fiberglass job, than put primer on the hood, put and sand filler to a shape you're satisfied with, cover up with a final layer of primer all over and than put it aside. Than take the filter housing, prep and do paint over it. Easy to redo if not perfect by the 1st attempt and also possible to switch the color if you not almost like it after seeing an actual part of the truck. 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554534 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 Thanks for that vlad yeah I forgot about the breather. That’s also coming off. I’m changing it actually I have another one. I’m gonna put on there. That one is a little bent. and the lid has taken some abuse. I’m gonna have to work with that thing as well to get it straight, but yes, I was also planning on painting the nose last not sure where the frame and wheels will fit in. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554543 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 Still have to change the transmission and the exhaust and tires… bob Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554544 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 you know,,,,this truck had needed so much work and still does frankly...after owning it 30 years ,,it was a piece of shit, i should have gotten alot cheaper,,,,the only thing this truck had going for it was solid cab and strong engine...bob Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554546 Share on other sites More sharing options...
mowerman Posted June 30 Author Share Posted June 30 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73081-finally-some-dm-progress/page/32/#findComment-554547 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.