Jump to content

Recommended Posts

O.D.,,,  I have a few OLD cast iron pots that are rusty..  I was thinking about using my blasting cabinet to clean them, then start over and season them... What are your thoughts on using the blasting cabinet... I was thinking about doing one of my Chinese pans first, as a tester..

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542048
Share on other sites

I don't even like using Crisco seasoning pans anymore, never mind cooking and baking with it.  Animal fats the way to go! 

I know this sounds like something off of The Beverly Hillbillies but raccoon fat is the best if you can find some. Bacon grease would work but its better to find some with no salt in it. 

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542053
Share on other sites

15 minutes ago, BOBWhite said:

I don't even like using Crisco seasoning pans anymore, never mind cooking and baking with it.  Animal fats the way to go! 

I know this sounds like something off of The Beverly Hillbillies but raccoon fat is the best if you can find some. Bacon grease would work but its better to find some with no salt in it. 

That's the reason I use the Crisco, no salt. I bought a big chunk of cured hog jowl to rub it with before I do the Crisco. I'm sure it's loaded with salt, but salt works good to clean cast iron too. I just don't want to use salted fat to season it and then let it sit for months before I use it again.

This is what I'm going to wipe it out with first, easy to grip and hold too.

PXL_20231115_234927295.thumb.jpg.eb7202bed1fb3a5d85a4bf76f7272d96.jpg

  • Like 1

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542054
Share on other sites

1 hour ago, Joey Mack said:

and scrub them by hand???  TJC.. they are really rusty,,  

no, i meant blast then with baking soda or walnut shells. 

  • Like 1
  • Haha 1

when you are up to your armpits in alligators,

it is hard to remember you only came in to drain the swamp..

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542058
Share on other sites

tjc think jojo is under the impression you are joking. I know the walnut shells are used a lot. never heard of the baking soda . would the two be used separate  or together??  that would be a lot of baking soda . fine grit blast sand  maybe depending how bad pots are. and size /pressure of blaster. 

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542063
Share on other sites

baking soda is use by itself. 

"soda blasting" uses baking soda. very fine and does not cause warping due to heat. 

plus it will wash off and not leave residue like sand will.

  • Like 2

when you are up to your armpits in alligators,

it is hard to remember you only came in to drain the swamp..

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542077
Share on other sites

No,  I know what hes saying..  Its just that my cabinet is large and the sand hopper is as well.  I would have to flush out the cabinet and replace the media, then do it again when Its time to do my typical work..  Its all good,,  yes the sand will leave some residue..  my thought was to blast them, wipe them out will corn oil then bake them on the grill for an hour, then re-season them..   Just having a little fun here..   :) jojo 

  • Like 1
  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542078
Share on other sites

Here's something Zina got to clean cast iron. I used it to scrub those skillets, it came from Lodge too. I think she found it at the Walmart store. It works good too, pretty stiff bristles.

PXL_20231116_143547159.thumb.jpg.d4a49dc2dd2e2235a77d0775e569761d.jpg

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542090
Share on other sites

Joey, How about "Dry ice blasting"? May have to hire someone or rent a machine. We have a local guy you can drop small stuff off  at his shop.

This is just an example,   https://www.coldjet.com/our-equipment/dry-ice-blasting-equipment/    .....Hippy

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542116
Share on other sites

pots will be dry Paul,,  For Sure..  here they are..  One is supposed to be really Old..  if I have time this weekend I will do 1 or 2 of the modern ones...  I think it will be fine..   

KIMG2412.JPG

KIMG2414.JPG

KIMG2413.JPG

KIMG2415.JPG

  • Like 2
Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542117
Share on other sites

you have me curious TJC...  I just see cast iron..  I guess I dont see a negative for blasting the inside and wiping it clean then baking them...   Thank you for chiming in...  

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542119
Share on other sites

On 11/16/2023 at 11:13 AM, other dog said:

They said just never let them soak and when you wash it to dry it immediately, preferably by putting it on the stove burner until it's completely dry

 

^^^^^THIS^^^^^

 

I've been doing this to Our Camp over for years.. Never been Olied either! & still as clean as the day We got It..

 

image.png.a915d4e7822f19be3bea61384b175444.png

 

Picture to show what I'm Talking about.. 

 

Don't bother with stand, just sit it straight on the coals & a shovel full of Hot Coals on the Lid & you can roast a piece of Meat to perfection..!

  • Like 1

"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542126
Share on other sites

4 hours ago, Joey Mack said:

you have me curious TJC...  I just see cast iron..  I guess I dont see a negative for blasting the inside and wiping it clean then baking them...   Thank you for chiming in...  

Im curious as well 

Paul 

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542130
Share on other sites

because the sand will get in places it will be almost impossible to get out of, just like blasting a car. 

and than 6 months later you will be cooking something and still have sand grains showing up in the food. 

walnut shells, baking soda, or even dry ice as 70mackmb said will not have any effect of food days, or even months later. 

when you are up to your armpits in alligators,

it is hard to remember you only came in to drain the swamp..

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542136
Share on other sites

14 hours ago, tjc transport said:

outside you can use almost anything. it is inside that counts.

Yes, I put the wire brush wheel in my drill and worked on some of those skillets with it, used fine sand paper on some too.

  • Like 2

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/73545-pictures-of-the-week/#findComment-542144
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...