Tito Posted January 30 Share Posted January 30 I have a 1974 r685t I’m trying to convert my front axle from Dayton wheels to hub piloted wheel to match the rear axle can this be done and what information do I need to get it done Quote Link to comment https://www.bigmacktrucks.com/topic/73804-convert-to-hub-pilot-wheels/ Share on other sites More sharing options...
0 Geoff Weeks Posted January 31 Share Posted January 31 Gone the other way on a few axles. I look at seal and bearing numbers and then compare with what you can find in the junkyard. Converted both IHC (Spicer) and Eaton to spokes using this method. If the bearing numbers match, the thing to double check is the bearing spacing on the spindle. Otherwise take your axle model and look for Hub pilot hubs on the same axle model. That is 100% to fit, but cuts your choices by a whole lot. Quote Link to comment https://www.bigmacktrucks.com/topic/73804-convert-to-hub-pilot-wheels/#findComment-545875 Share on other sites More sharing options...
Question
Tito
I have a 1974 r685t I’m trying to convert my front axle from Dayton wheels to hub piloted wheel to match the rear axle can this be done and what information do I need to get it done
Link to comment
https://www.bigmacktrucks.com/topic/73804-convert-to-hub-pilot-wheels/Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.