mjrays Posted March 12 Share Posted March 12 I know it's Been talked about can't seen to find it but talking door panels off R model cab helpful hints I've never taken one off I know the track is attached to it thanks Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/ Share on other sites More sharing options...
mechohaulic Posted March 12 Share Posted March 12 all outer philips head boats removed . IMPORTANT == the 3 = three screws 0n door latch removed ; leave the door handle/ window crank attached for panel removal. a slight shimmy/ shake panel will drop down low enough to remove assembly. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548024 Share on other sites More sharing options...
mechohaulic Posted March 13 Share Posted March 13 part 2 - knew I forgot some thing earlier post. IF door has the key tumbler still intact ' with the key in lock (helps hold tumbler - not needed ) with a pair of needle nose pliers on inner door next to door latch remove thin tumbler locker. has a bend to keep it in place, push toward outer shell then pull out of door. sounds technical = it's not . thin locker will pull out 3/4 way out =remove tumbler . simple two minute job. 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548030 Share on other sites More sharing options...
Joey Mack Posted March 13 Share Posted March 13 2 minutes if your aim is good,, getting the stem to hit its target can test your patience. But yes, as Mech says, 2 minute job.. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548031 Share on other sites More sharing options...
Popular Post mechohaulic Posted March 13 Popular Post Share Posted March 13 now remember the two minute job project is for REMOVAL .tumbler '' not including door panel install having key to put in tumbler is 3 minutes. LOL . total remove/ install door panel is ??? . can be total turn around time (not including repairs ) 10-- ?? minutes. 2 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548033 Share on other sites More sharing options...
Popular Post mechohaulic Posted March 13 Popular Post Share Posted March 13 7 minutes ago, Joey Mack said: 2 minutes if your aim is good,, getting the stem to hit its target can test your patience. But yes, as Mech says, 2 minute job.. wait till you get old the biggest challenge is having high hopes of :: the stem hitting the target before you both fall a sleep!! LOL 1 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548034 Share on other sites More sharing options...
Joey Mack Posted March 13 Share Posted March 13 I love messin with you.. yes,, you can change out the door locks in a few minutes.... and the ign. switch. is not too bad either.. just need a 10'' adjustable and a pick to get that done.. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548035 Share on other sites More sharing options...
Joey Mack Posted March 13 Share Posted March 13 Mech.... I was hoping you would get the joke.. Luv You Man.. jojo 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548036 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 Been so long since I took one apart, I don’t even remember all the details except sometimes you have to yank the whole thing out … bob Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548072 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 That is the window assembly for some reason the door mold is slightly too small…bob Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548073 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 Not quite understanding the door lock situation. I have always removed the door lock first are you saying the later models did not have the removable spring loaded lock from outside?… bob Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548074 Share on other sites More sharing options...
Popular Post Joey Mack Posted March 14 Popular Post Share Posted March 14 No, just picking at Mech.. there is still the spring steel wedge in the edge of the door that holds the key hole in place.. 2 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548080 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 Ok been 30 years or close since I had mine apart I’ll have to be doing it again soon stripping both sides for drivers door replacement and lubrication and paint Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548083 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 Lubed both sides and new felt… but it was so long ago both sides squeak when rolling down windows I guess the grease is not life long lol… bob Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548084 Share on other sites More sharing options...
mechohaulic Posted March 14 Share Posted March 14 making a repair to squeaking window VS going in for rebuild/ paint is little different. to make easy roll less noise a can of lube having a plastic extension on nozzle works wonders. roll window up stick spray extension between window and door channel then spray area which the crank mechanism is approximately located along with side channels . too much spray you have a mess and grease rolls out bottom= paint won't stick. window up puts less grease on glass also mechanism near top . reality it's better to remove complete window panel and do it right under your situation of owning and painting truck. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548089 Share on other sites More sharing options...
mowerman Posted March 14 Share Posted March 14 Yes, that’s the plan. Thanks for that. Doors are a lot easier. To takeoff they are already heavier than shit without the guts…. Bob Quote Link to comment https://www.bigmacktrucks.com/topic/73957-door-panels/#findComment-548094 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.