70mackMB Posted March 15 Share Posted March 15 “May the mist of Irish magic shorten every road and may your friends remember the favors you are owed.” 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/ Share on other sites More sharing options...
mowerman Posted March 15 Share Posted March 15 Yeah baby back at you bud. This is the only weekend my wife will fix me corn beef cabbage. I could eat it almost every night ha ha.. bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548143 Share on other sites More sharing options...
Popular Post RowdyRebel Posted March 16 Popular Post Share Posted March 16 ...but if every road were shortened, they wouldn't get us where we need to go...unless they're just straightened out to remove all of the bends, twists, turns, and hills to provide a more direct route...but then they'd just be straight, flat, and boring. I like the narrow little hilly twisty curvey fun roads. Always have. Doesn't matter if I'm on 2 wheels or 18, that's always been my preference. Hell, as long as I've got at least 4 wheels, I'll even take a dirt or gravel road over the interstate...and my wife will even vouch for that. Our trip to Colorado last summer I spent more time driving on gravel than the interstate, even pulling the travel trailer. She wasn't amused, but it got us where we were going.😂 2 1 Quote When approaching a 4-way stop, the vehicle with the biggest tires has the right of way! Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548205 Share on other sites More sharing options...
mowerman Posted March 16 Share Posted March 16 I think you put this in a wrong area, but I am the same way the highways around here and nothing but drag strips. They’re no fun at all…. with triple trailers a lot of times on better off on straight road if I get swingers, but I have had them on back roads to get around accidents And yes, just like you said you’re usually the only one out there nobody behind you makes it nice ,, without some pushy jackass all over you trying to get around as quick as they can first chance they get. Happy Saturday. Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548209 Share on other sites More sharing options...
navypoppop Posted March 16 Share Posted March 16 I can and used to celebrate St. Patrick's day years ago but that was my anniversary date with the ex-wife until I got rid of her. I then found my current angel and 45 years later we still don't recognize March 17. Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548220 Share on other sites More sharing options...
Adkat Posted March 17 Share Posted March 17 To be sure to be sure. Merry St Pat's Day fellas. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548234 Share on other sites More sharing options...
RowdyRebel Posted March 18 Share Posted March 18 We actually had our St Patricks day dinner yesterday since the wife was off. I got a 3.5# flat cut of corned beef, 4# of those little red potatoes, 2# of baby carrots, and a sweet onion & tossed it all in the crock pot before heading outside to work on the F250. Around 5:30, a guy comes walking up the driveway. Apparently, they're moving from Indiana over to Missouri and his wife's car lost power steering. He was driving the moving truck. He was seeking some power steering fluid, so I filled up a quart jug & handed it to him inquiring what was wrong...because if it was leaking that bad, they'd be right back where they are before they made it out of town. They'd had some work done on the radiator, and apparently they didn't secure a line (turned out to be the cooler), so it had come loose & dragged.on the ground. I gave him a piece of hose and some clamps to try to patch it based upon what he'd told me & sent him on his way. 7:00 our dinner is almost done so I'm cleaning up & notice he's still over there...so I jump in the Ranger and go check on them. Turns out the hole was on the bend in the end of the cooler, so the patch I'd thought would work wasn't going to work. I got to looking at it and decided by removing a couple hose clamps I could remove the cooler, then use some hose barbs to loop in a short section of hose to complete the circuit. They only had 30 or so miles to go, so it'd get them there. Anyway, when I got back home, I discovered the family had decided to eat without me. So much for enjoying a family dinner.🤦♂️ Worst part of the story, though, is when I got back after helping them and was putting tools away out of the back of the Ranger, I found the steel backing plate that was SUPPOSED to be between the water pump & timing cover. Oops. Guess I get to pull it apart again. I had THOUGHT all I had left to do was put the radiator back in, attach the fan, install the new upper & lower hoses and fill 'er up. Guess now I get to remove the accessory brackets (again) so I can pull the water pump off (again) and put that plate in there. Luckily I don't have to pull the timing cover off this time...THAT was a real b¡t©h to get on with all of the gaskets & seals trying to shift out of place while I was getting it put in. HOPEFULLY that won't leak...we'll find out when I eventually get to fill 'er up, I guess. Tonight we're having pizza.🤷♂️ Quote When approaching a 4-way stop, the vehicle with the biggest tires has the right of way! Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548289 Share on other sites More sharing options...
mrsmackpaul Posted March 18 Share Posted March 18 On 3/16/2024 at 11:24 PM, RowdyRebel said: unless they're just straightened out to remove all of the bends, twists, turns, and hills to provide a more direct route...but then they'd just be straight, flat, and boring. I like the narrow little hilly twisty curvey fun roads. You best not come to Australia then, it is mainly straight flat and very same same Sometimes little changes for hours Anyway hope you all had a good one Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548295 Share on other sites More sharing options...
Adkat Posted March 18 Share Posted March 18 Yep agree with Paul, but they do throw the occasional floodway or S bend in to mix it up after you've settled in for the first couple of hours of dead straight, flat, not much to look at driving. Unless the natives are moving about, then you gotta try and keep them off the bullbar. Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548303 Share on other sites More sharing options...
Brocky Posted March 18 Share Posted March 18 (edited) Paul, Our bus trip from Cairns to Townsville, vie Lake Tineroo, sure did go up over and back down some crooked hilly roads!!! Edited March 18 by Brocky 1 Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548313 Share on other sites More sharing options...
mrsmackpaul Posted March 18 Share Posted March 18 Yeah Brocky, there is bendy bits here and there, they are definitely the exception not the norm Paul Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548315 Share on other sites More sharing options...
RowdyRebel Posted March 20 Share Posted March 20 Sounds like this time I went riding with a bunch of flatlanders upstate. I was giving them a hard time about being crazy & reckless because they were riding wheelies up past 100 mph. Later on in the day, we were cruising along when one guy gunned it...so we all took off. All of a sudden, everybody else (except me) got on the binders hard...I held that throttle wide open and zipped through the approaching S-curve. Next time we stopped, they were ribbing me for giving them a hard time for riding their wheelies when I'm the one taking 70 mph curves at 130 mph. I told 'em "Looked like a 130 mph curve to me!"😂 Apparently, that's the only curves they have around there. Personally, I couldn't live like that.🤷♂️ Quote When approaching a 4-way stop, the vehicle with the biggest tires has the right of way! Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548436 Share on other sites More sharing options...
Swishy Posted March 20 Share Posted March 20 We do have some windy twisty bits .. 1.1/2 hour drive North East of Melboure Better known As Maroondah hwy travelling the Black Spur heresa clip I did in the Kenworth 1/2 truck rturning from the Alexandra Truck Sho 2017 cya 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548475 Share on other sites More sharing options...
Brocky Posted March 20 Share Posted March 20 Swishy, Thank You!!! That looks a lot like whatever road our bus was on coming southwest out of Cairns up into the tableland. With some very pretty waterfalls, the fig tree with a boardwalk around it, and good dairy farming country. Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548484 Share on other sites More sharing options...
mrsmackpaul Posted March 22 Share Posted March 22 Only bendy bits are really along the Great Dividing Ranges that go from the tip of Cape York to South Australia I guess it is the Australian equivalent of the Rocky Mountains The rest of this wide brown land is predominantly very flat and same same Not uncommon to travel 10 miles without a single bend Some roads are 60 miles or more with out so much as a bend So yes we are flat, infact we are the flattest country on earth and have areas were theres not a single tree as far as you can see and you can see the curvature of the earth, don't tell a flat earther this, their head will explode 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73964-happy-st-patricks-day-laddies/#findComment-548712 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.