other dog Posted April 12 Author Share Posted April 12 11 hours ago, The Rubber Duck 006 said: YOU'RE GONNA SHOOT YOUR EYE OUT RED RIDER!!! I think it is a Red Ryder, I bought it at Walmart to scare away all the feral cats that used to be lurking around at the old house. Then neighbors moved in next door. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549860 Share on other sites More sharing options...
other dog Posted April 12 Author Share Posted April 12 I went ahead and ordered the rubber to go under the tank straps when I ordered the tank. I looked in the gas hole with a flashlight and I could see all these dark blobs "swimming" around on the bottom of the tank. I poked them with a stick- a clean stick, I didn't want to contaminate anything- to see what happened and they would kind of break a part. The sample in the aluminum pan didn't come from the very bottom either, I just loosened the plug on the end and let it drip in the pan. I never saw such a change as that gas made overnight. So obviously there was no rust, it had to be algae. The pick-up tube lacked about 4 inches from reaching the bottom of the tank, so that would leave a lot of gas in the tank, maybe that had something to do with it. I probably could have put that tank right back on it after I cleaned it out with the acid and been fine, but we decided to just keep the new one and put it on when it gets here. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549861 Share on other sites More sharing options...
other dog Posted April 12 Author Share Posted April 12 13 hours ago, Joey Mack said: My ex. had a freind to put a soda or sugar in the fuel filler.. We had a volatile relationship.. I still have the locking gas cap on it today.. been 17 years... This is no B.S. !! Uhh, yeah, I'd say you did! 🤣 I'm going to try to pull the top off the carburetor without destroying anything and take a look too. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549862 Share on other sites More sharing options...
The Rubber Duck 006 Posted April 12 Share Posted April 12 31 minutes ago, other dog said: I think it is a Red Ryder, I bought it at Walmart to scare away all the feral cats that used to be lurking around at the old house. Then neighbors moved in next door. That's Hilarious!! Gonna start calling you Ralphie!! 😆 😂 😆 😂 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549863 Share on other sites More sharing options...
mowerman Posted April 12 Share Posted April 12 Ya ralphy you’ll shoot your eye out and yes that’s fun to say lol bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549865 Share on other sites More sharing options...
mowerman Posted April 12 Share Posted April 12 I also have a bb rifle as well as 2 real ones 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549866 Share on other sites More sharing options...
other dog Posted April 12 Author Share Posted April 12 4 hours ago, mowerman said: I also have a bb rifle as well as 2 real ones I gave the .22 rifle that my grandfather gave me to my niece. It's a Remington Fieldmaster pump, a very nice rifle. I do have a 700 Remington .30-06 but I thought that would be overkill. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549879 Share on other sites More sharing options...
Popular Post other dog Posted April 12 Author Popular Post Share Posted April 12 My tank sealer came today too. And it's non-returnable. Bummer. Guess i'll ask around or put it on marketplace. I was going to work on the International today but the wind is fierce! Gusts to 47 mph they said, whoever ''they'' are. I want to take the top off the carburetor and check for sludge, and check the fuel lines. Dave told me it was easy to check the float bowls for sludge, all I have to do is take 4 screws out, but what worries me is my hands. I have arthritis in my hands so bad i'm afraid i'll drop a screw or something, drop one in the carburetor and the truck will be on marketplace. I've dropped a camera or two, amongst other things, so dropping a screw would be no problem for me. So, with that being said, here's some girl by some highway somewhere. 3 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549880 Share on other sites More sharing options...
mechohaulic Posted April 12 Share Posted April 12 2 hours ago, other dog said: My tank sealer came today too. And it's non-returnable. Bummer. Guess i'll ask around or put it on marketplace. I was going to work on the International today but the wind is fierce! Gusts to 47 mph they said, whoever ''they'' are. I want to take the top off the carburetor and check for sludge, and check the fuel lines. Dave told me it was easy to check the float bowls for sludge, all I have to do is take 4 screws out, but what worries me is my hands. I have arthritis in my hands so bad i'm afraid i'll drop a screw or something, drop one in the carburetor and the truck will be on marketplace. I've dropped a camera or two, amongst other things, so dropping a screw would be no problem for me. So, with that being said, here's some girl by some highway somewhere. HI way SOMEWHERE !! you could have at least got the route number and direction;; now the BMT crew sees what kind of a friend you are !LMAO one thing for sure those "tanks" aren't alum. someone must recognize the highway or mountain range ... thanks for the picture 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549884 Share on other sites More sharing options...
Popular Post 70mackMB Posted April 12 Popular Post Share Posted April 12 Maybe she can hold your screw while you diddle with her the carburetor. Hard telling not knowing! .....Hippy 1 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549886 Share on other sites More sharing options...
mechohaulic Posted April 12 Share Posted April 12 4 minutes ago, 70mackMB said: Maybe she can hold your screw while you diddle with her the carburetor. Hard telling not knowing! .....Hippy bet that's why so many dairy farms had to close. milk hauling tanks got bigger. LOL 1 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549888 Share on other sites More sharing options...
Mark T Posted April 12 Share Posted April 12 That truck probably has a Holley on it. Might not be hard to get parts for the carb. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549891 Share on other sites More sharing options...
Popular Post Vladislav Posted April 13 Popular Post Share Posted April 13 13 hours ago, mechohaulic said: someone must recognize the highway or mountain range ... thanks for the picture My guess is the most observers would "not see the forest because of trees" in the particular case. 1 1 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549900 Share on other sites More sharing options...
Popular Post Vladislav Posted April 13 Popular Post Share Posted April 13 On 4/10/2024 at 2:53 AM, other dog said: Here's one for you Vlad. Tom, many thanks! I have already had this one in my 'puter but as we say there can never be too many trucks! The one on the picture is the most probably R688 with thar R700 big grille installed. For some reason SGT R-models didn't have classic later R-model grill installed at all or had the appearance as on this picture. Speaking the tanks there were two of them at each side. The main one was that long so had to be hanged by 4 brackets. That's a factory configuration tank but probably the longest avalible option. The 2nd set was for fuel. I tell that by a point which was mentioned in a build sheet for my truck. Two additional aluminium fuel tanks of certain amount of gallons were specified. What's interesting my truck, along the 4 others imported to Russia as a bunch, had those tanks specified in the build sheets but never had them installed for some reason. I could see the mounting holes pre-drilled in the rails but no appearance of any brackets ever attached to there. 3 1 2 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549902 Share on other sites More sharing options...
mowerman Posted April 13 Share Posted April 13 19 hours ago, other dog said: I gave the .22 rifle that my grandfather gave me to my niece. It's a Remington Fieldmaster pump, a very nice rifle. I do have a 700 Remington .30-06 but I thought that would be overkill. Definitely a time and place for the heavy iron ha ha I’ve got a Winchester 1873, 44-40 and a henry golden boy 44 magnum Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549910 Share on other sites More sharing options...
mowerman Posted April 13 Share Posted April 13 I think my bb rifle is a daisy. I’m not sure. I wound up getting it for free. Somebody left it behind that moved out of a house that I rented. I’ve been hauling it around ever since I didn’t even know I still had it the other day I was looking for some old pictures and I saw it. Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549911 Share on other sites More sharing options...
mowerman Posted April 13 Share Posted April 13 I prefer the stock shutter look on the R model but the chrome grill definitely looks good as well… bob Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549912 Share on other sites More sharing options...
1958 F.W.D. Posted April 13 Share Posted April 13 On 4/12/2024 at 9:17 AM, other dog said: I looked in the gas hole with a flashlight and I could see all these dark blobs "swimming" around on the bottom of the tank. I wonder if it was crap from ethanol gasoline? Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549914 Share on other sites More sharing options...
other dog Posted April 13 Author Share Posted April 13 3 hours ago, 1958 F.W.D. said: I wonder if it was crap from ethanol gasoline? Possibly. Brocky advised me to only use non- ethanol in it, like I use in all my small engines. I was advised to do that years ago with small engines by someone with much knowledge about such matters, and haven't had any issues yet. I'm thinking I'll get the 90 octane non ethanol from the Sheetz just up the road, put the lead additive in it, a can of Sea Foam periodically, and Sta-Bil in the fall. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549915 Share on other sites More sharing options...
Brocky Posted April 14 Share Posted April 14 Tom, I always add the Stay-Bil to the cans before I fill them.. That way it is mixed in good!! And then fill the DT from the cans.. 2 Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549936 Share on other sites More sharing options...
tjc transport Posted April 14 Share Posted April 14 since we can not buy pure gas here in New Jersey, i use a double dose of stabil, and a double dose of marine stabil. the 4 doses the two compounds lets me store gas for 18-24 months and it is still good. i do not keep it for longer than 24 months though. if there is any left after 2 years it gets poured into the car and fresh is put in storage cans in the garage. 2 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549938 Share on other sites More sharing options...
1958 F.W.D. Posted April 14 Share Posted April 14 20 hours ago, other dog said: Possibly. Brocky advised me to only use non- ethanol in it, like I use in all my small engines. I was advised to do that years ago with small engines by someone with much knowledge about such matters, and haven't had any issues yet. I'm thinking I'll get the 90 octane non ethanol from the Sheetz just up the road, put the lead additive in it, a can of Sea Foam periodically, and Sta-Bil in the fall. Check with folks who know that engine- if the valves have hardened seats, the lead additive isn't necessary. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549947 Share on other sites More sharing options...
mechohaulic Posted April 14 Share Posted April 14 another positive when we lived in TN (one of many); there were gas stations which still sold real gas. Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549953 Share on other sites More sharing options...
Brocky Posted April 14 Share Posted April 14 1 hour ago, mechohaulic said: another positive when we lived in TN (one of many); there were gas stations which still sold real gas. Around here most of the new QT's, and some of the small local store chains, have non ethanol all the time. Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549956 Share on other sites More sharing options...
Popular Post harrybarbon Posted April 15 Popular Post Share Posted April 15 On 4/12/2024 at 10:33 AM, Brocky said: With this ethanol in the gas anything can happen!!!! When it sits it separates and draws condensation... Brocky, about 12 years ago my Toyota Prado - V6 injector petrol (gas) motor, was choking as I tried to start it. The Toyota service manager asked what petrol are you running. I said the special E10 which is same as your ethanol. He said put as much 98 octane fuel into tank give it time to mix with the ethanol and then try starting. Eventually I got it running but it was rough as and felt like 3 pistons firing. I had to get the fuel drained, some cleaning product thru the injectors and since then I only fill with 98 octane fuel. Best fuel economy and power as well. My local heating plumber told me same with LPG, there are different quality LPG. He also told me that his Ford Falcon work ute, 6 cyl since new he filled with 98 octane. 750,000 klms and head never been touched and motor runs perfectly well and does not burn oil between oil changes. 3 Quote Link to comment https://www.bigmacktrucks.com/topic/73997-pictures-of-the-week/page/10/#findComment-549969 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.