dieselmotorworx Posted March 30 Share Posted March 30 Just picked up 3 2015 Macks with MP7 engine. What engine specific tools are needed to work on the MP7? Is there a list? Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/ Share on other sites More sharing options...
Solution Joey Mack Posted March 31 Solution Share Posted March 31 Maybe look up ''Mack Essential tools'' there are a few for the alignment of the rear cover, .004'' feeler gauge for gear train backlash, a cam timing tool kit,, A+B slot stuff., you can make your own cam lifting jig, just put padding on the hooks, clear fuel return hose and banjo fittings, Premium Tech Tool in a good laptop, Patience..... and the book that I have.. the barring tool, front main seal and rear main seal drivers, ok... my brain is overheating,, maybe someone else will add to the list.. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549166 Share on other sites More sharing options...
dieselmotorworx Posted April 14 Author Share Posted April 14 What book do you have? Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549941 Share on other sites More sharing options...
Joey Mack Posted April 14 Share Posted April 14 During the end of my career at a Mack dealership, i printed books from 'Impact'. I only printed engine and M-Drive stuff. I may have some fault code stuff too. Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549942 Share on other sites More sharing options...
dieselmotorworx Posted April 14 Author Share Posted April 14 Do you have to work for the dealer to get access? Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549943 Share on other sites More sharing options...
dieselmotorworx Posted April 14 Author Share Posted April 14 I am looking at a legit subscription for premium tech tool but it's expensive with the programming capabilities but if it gives me access to the repair info maybe it's worth it. Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549944 Share on other sites More sharing options...
Joey Mack Posted April 14 Share Posted April 14 PTT is a great tool. You wont have full access because you are not a dealer, but what you get is very good.. is been 2 years since i used it, but the new versions and updates are ready to go . You will need a Vocomm box. Look at the price of it before you dive in.. Quote Link to comment https://www.bigmacktrucks.com/topic/74008-mp7-tools/#findComment-549946 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.