mechohaulic Posted September 15 Share Posted September 15 wasn't for the buffalo winter : been there/ seen that: changed a KW steering box on side of highway during ice storm, bet you could have crawled under , stuffed a rag in the hole to prevent oil loss (reason it seized up ?) and drove more. LOL.. also in '71 must have been 30 w oil not 0-20w crap of today. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post GA_Dave Posted September 15 Popular Post Share Posted September 15 14 hours ago, mechohaulic said: wasn't for the buffalo winter : been there/ seen that: changed a KW steering box on side of highway during ice storm, bet you could have crawled under , stuffed a rag in the hole to prevent oil loss (reason it seized up ?) and drove more. LOL.. also in '71 must have been 30 w oil not 0-20w crap of today. The hole in the oil pan was so big you could almost fit your hand into it. All the oil was gone in seconds. I miss 10w30. I once did a transmission swap up there during the winter. I wasn't on the side of the road, but it wasn't in a garage either. It took me two days due to frequent trips inside to thaw out. I moved south not long after! 3 Quote Link to comment Share on other sites More sharing options...
other dog Posted September 15 Author Share Posted September 15 44 minutes ago, GA_Dave said: The hole in the oil pan was so big you could almost fit your hand into it. All the oil was gone in seconds. I miss 10w30. I once did a transmission swap up there during the winter. I wasn't on the side of the road, but it wasn't in a garage either. It took me two days due to frequent trips inside to thaw out. I moved south not long after! Not to be changing the subject, but that's one of my issues with the big green truck that doesn't run. (It runs great now, but that name kinda stuck) I do all the work on it outside, in the driveway, with common hand tools, and for the most part by myself. Not so much "fun" in it anymore 🤣 1 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
Popular Post tjc transport Posted September 15 Popular Post Share Posted September 15 15 hours ago, mechohaulic said: you can't do that with todays crap ; computer gets a signal of faulty cyl , engine off. i love reading that "my engine is ruined from no oil pressure" on the ford diesel truck forums.... then the dipsticks start arguing with you when you tell them it is impossible that could happen because the HPOP that fires the injectors is run by low pressure oil pump. if the engine looses oil pressure the engine will shut off before any damage is done. and they come back with "well my mechanic said"..... to which i reply i am a mechanic... your parts changer tech is trying to rip you off for a $8,000 engine when you only need a 4-500 dollar part. 3 1 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
Popular Post other dog Posted September 15 Author Popular Post Share Posted September 15 On 9/13/2024 at 2:06 PM, Freightrain said: The good thing Tom, once all these systems are upgraded, it will be a reliable driver you can take anywhere. Sadly you are the one paying for all of it right now. But next summer it should be a truck you can drive to any show and not worry. We drove it to the Walmart store in Appomattox with only a minor issue. The adjustable throttle return spring holder slipped on the shaft and it was very slow to come back to idle when I was trying to change gears. I moved it back where it was when we got parked at the Walmart store but I'm still going to get another return spring and put it on it. I remember when every gas station and a lot of country stores had things like carburetor return springs and battery cable ends hanging on the wall. 7 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
mowerman Posted September 15 Share Posted September 15 59 minutes ago, GA_Dave said: The hole in the oil pan was so big you could almost fit your hand into it. All the oil was gone in seconds. I miss 10w30. I once did a transmission swap up there during the winter. I wasn't on the side of the road, but it wasn't in a garage either. It took me two days due to frequent trips inside to thaw out. I moved south not long after! i pulled a transmission automatic out of a 55 chevy wagon outside was around 18 degrees i was only around 20 years old,,,,i also moved to LA shortly after,lol i also drove that oil burning 307 all the way out there,,,,busted a rocker arm somewhere in Arizona got another one in a wrecking yard,,,,made it all the way out there and back to massachusetts without anymore issues except going thru a case of oil,,,,not sure what was up with those things,,,but everybody seems to agree,they didnt hold up well...bob 2 Quote Link to comment Share on other sites More sharing options...
mowerman Posted September 15 Share Posted September 15 and yes tom gas stations these days are completly differant they were also full service with gas jockeys,,, and fullon repair bays,a lot of us started out pumping gas and cleaning windshields 1 Quote Link to comment Share on other sites More sharing options...
Popular Post other dog Posted September 16 Author Popular Post Share Posted September 16 21 hours ago, mowerman said: i pulled a transmission automatic out of a 55 chevy wagon outside was around 18 degrees i was only around 20 years old,,,,i also moved to LA shortly after,lol i also drove that oil burning 307 all the way out there,,,,busted a rocker arm somewhere in Arizona got another one in a wrecking yard,,,,made it all the way out there and back to massachusetts without anymore issues except going thru a case of oil,,,,not sure what was up with those things,,,but everybody seems to agree,they didnt hold up well...bob I had a 68 Camaro one time, I was about 20 years old. It had a 250 six cylinder in it with a 3 speed transmission and the rear main bearing seal was bad. So bad oil pretty much just poured out of it. I never fixed it because I bought the car to swap in a 350 and a 4 speed that I already had. But I would run that car out of oil, drove it home many times with the oil light on and it would be clattering and clanking, fill it back up with oil, the racket would stop, and it was fine, until the next time I ran it out of oil. After that I always figured that the 250 6 cylinders had to be one of the toughest engines ever made, because I abused the heck out of that one. 3 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
mowerman Posted September 20 Share Posted September 20 Yes, I agree. I used to work in a gulf full service station and one of our customers had that exact set up 68 Camaro but it was a 250 automatic I don’t even know how I remember that thing I even remember what the girl look like that owned it I think mainly it sounded real good when you revved it up … I think it had a slight leak in the donut gasket front pipe to manifold and yes, that was 50 years ago ha ha ha but bottom line Tom I think yes You couldn’t kill them I also had one and a 57 Chevy. It was actually my ex-wife car wound up pulling it out of there and putting it in my 51 Chevy pick up. Sorry I’m going on with old people stories.. Bob Quote Link to comment Share on other sites More sharing options...
tjc transport Posted September 20 Share Posted September 20 Back many many years many many moons ago, the station owner I was working at called me on satuday afternoon. a guy pulled in with "an old chevy" that was not running rite and wanted to sell it. Monday morning I went in to find a 66 Chevelle super sport, with 250 six cylinder and 4 speed. I could not get the $50 asking price out of my pocket fast enough!. headers, cam, Mallory dual points distributor, 4 barrel intake and carb later, I had a 12 second race car. That car made me a whole lot of money racing before I finally sold it for $2,000 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
mowerman Posted September 20 Share Posted September 20 Holy shit score that was my favorite year of buddy of mine. Had one 50 bucks? Can’t even buy a tire for that now. 1 Quote Link to comment Share on other sites More sharing options...
tjc transport Posted September 20 Share Posted September 20 Yup. Last time I looked the N-50 15's were around $400 each. I think I paid $100 for two tires AND rims. 1 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
BOBWhite Posted September 20 Share Posted September 20 Lol that story sounds like Did you put the 4 barrel carb, headers, and cam on that 250 or did you swap in something else? 1 Quote Link to comment Share on other sites More sharing options...
tjc transport Posted September 20 Share Posted September 20 all went on the 250 six cylinder. 1 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
Joey Mack Posted September 20 Share Posted September 20 I would love to have a square body C-10 with a 250 straight six and 3 on the tree.. that was my first of about 8 square bodies.. I still drive my home made C-30 redneck truck.. 1 Quote Link to comment Share on other sites More sharing options...
Geoff Weeks Posted September 20 Share Posted September 20 1 hour ago, Joey Mack said: I would love to have a square body C-10 with a 250 straight six and 3 on the tree.. that was my first of about 8 square bodies.. I still drive my home made C-30 redneck truck.. My father bought exactly that in 1973, only had a few options, Posi, full foam seat, PS PB. $2700 cash IIRC. It was handed down through my brother and I, but it was a rust-bucket. You could, however do a full tune-up in a thunder storm and not get wet, there was so much room under the hood. It was ok, but of the big 3, I'd say Ford (300/240) and Dodge (225) were better engines. I would have opted for the 292. I pulled a U haul trailer from Ma to Chicago, over rt 2 in Mass, climbing the hills in 2nd at redline. 1 Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted September 20 Share Posted September 20 the 225 Mopar was great, the Ford 300 ,, well yes, the best of the group.. I have to bow down to that engine,, I'm always a Bowtie guy forever.. my 78 didnt have power steering, just power brakes.. It would float the valves at 98 MPH.. 1 Quote Link to comment Share on other sites More sharing options...
davehummell Posted September 20 Share Posted September 20 I owned a 1969 Pontiac tempest that had a 250 gm six cylinder and a three speed that was on the column. Had a 3/4-ton chevy pickup with a 292 six and I shoehorned a rather warmed up 292 six into a 1965 Toyota Landcruiser pickup with a later 4 speed trans. I owned a 1953 ford 1 ton dump with the six-cylinder 216 overhead valve engine. I had an old jeep with that overhead cam six-cylinder engine that they used in the Pontiacs. My stepdad had a ford pickup with that 300 six it was a very nice engine. 1 Quote Link to comment Share on other sites More sharing options...
Geoff Weeks Posted September 21 Share Posted September 21 The Dodge had individual ports/runner on both intake and exhaust, and was under square, with (IIRC) a 4 1/8" stroke and 3.4" bore, which made it a real pulling engine Ford was 4" bore, (on the 300) but don't remember the stroke, Pulled a few English double deck buses back to the barn with one. Both the Dodge and Ford were made in medium truck versions with heavier duty guts. Chevy 292 came in the C-40 and C-50 IIRC If you held my feet to the fire, I'd be hard pressed to say any of the American OHV 6's were bad engines. Well, may be the babbet rod Chevy Stovebolt, was too far behind the times. About the time it came out, IHC was building wet liner OHV 6's, just for comparison 1 Quote Link to comment Share on other sites More sharing options...
mowerman Posted September 21 Share Posted September 21 Great stories, fellas I’ve got pictures coming probably not what you’re looking for but all I can find right now ha ha tomorrow morning no, I’m just getting drunk with the lady ha ha Quote Link to comment Share on other sites More sharing options...
Brocky Posted September 21 Share Posted September 21 Tommy, Your truck looks great!!!!!!! But I still think you have to do the two tone green thing on the wheels and rims??? Do a photo shop on the parking lot picture and see what you think.. 1 Quote Brocky Link to comment Share on other sites More sharing options...
mowerman Posted September 21 Share Posted September 21 13 hours ago, Joey Mack said: the 225 Mopar was great, the Ford 300 ,, well yes, the best of the group.. I have to bow down to that engine,, I'm always a Bowtie guy forever.. my 78 didnt have power steering, just power brakes.. It would float the valves at 98 MPH.. my sister’s first car was a 65 Ford galaxy 300 6 banger three speed on the column. ahhhhhhhhhhhhhhh the good old days… bob 1 Quote Link to comment Share on other sites More sharing options...
mowerman Posted September 21 Share Posted September 21 I was just thinking I had another friend with a 64 Malibu six cylinder three speed of the column. It sounds way cool now but back in the day. Everybody was driving shit like that. That combination was very common. I’m thinking absolutely nothing of buying a used car for $100. Quote Link to comment Share on other sites More sharing options...
mowerman Posted September 21 Share Posted September 21 Come to think about it. My first car was a 64 Plymouth valiant slant six free speed on the column so long ago almost forgot about that thing paid $20 for the car. Quote Link to comment Share on other sites More sharing options...
Popular Post mowerman Posted September 21 Popular Post Share Posted September 21 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.