Jump to content

Recommended Posts

I have a 2014 Mack Pinnacle CHU613 with Mdrive transmission , when the truck warms up it starts loosing throttle while driving coming to a complete stop at times. Also when making turns it’ll start bucking. It doesn’t throw any codes in the process. Had it to our local Mack shop several times and they can’t figure anything out. We’ve replaced the accelerator pedal 3 times, the gear selector, wire harness for trans, speed sensor, pressure test on fuel system and they said it was fine. 
 

Has anyone experienced this? Or know what’s going on with this truck? 
 

Link to comment
https://www.bigmacktrucks.com/topic/74724-pinnacle-chu613/
Share on other sites

19 hours ago, RicDon said:

I have a 2014 Mack Pinnacle CHU613 with Mdrive transmission , when the truck warms up it starts loosing throttle while driving coming to a complete stop at times. Also when making turns it’ll start bucking. It doesn’t throw any codes in the process. Had it to our local Mack shop several times and they can’t figure anything out. We’ve replaced the accelerator pedal 3 times, the gear selector, wire harness for trans, speed sensor, pressure test on fuel system and they said it was fine. 
 

Has anyone experienced this? Or know what’s going on with this truck? 
 

Did they check for combustion in the fuel? Did they check the tank vents?  Did they check for something floating in the tanks? also is your truck equiped with roll over protection the yaw sensors could be causing this! all possibility's! 

Link to comment
https://www.bigmacktrucks.com/topic/74724-pinnacle-chu613/#findComment-561583
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...