MACKS Posted November 15, 2024 Share Posted November 15, 2024 Just my two cents but u really don’t need this on your engine,back in the day every one disconnected them or put an air switch in the cab to shut them off,just take it easy on the fuel pedal and u won’t roll any black coal,once u have boost then u can put the fuel to it… Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562003 Share on other sites More sharing options...
cruiseliner64 Posted November 15, 2024 Share Posted November 15, 2024 On 11/15/2024 at 1:44 PM, MACKS said: Just my two cents but u really don’t need this on your engine,back in the day every one disconnected them or put an air switch in the cab to shut them off,just take it easy on the fuel pedal and u won’t roll any black coal,once u have boost then u can put the fuel to it… Expand Is cylinder wash a problem without this working? Iv no experence with Mack engines and im getting advice from two sides...one says I dont need it and one says ill do damage to the engine because of cylinder wash from overfueling.....thanks for your input by the way... Paul Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562005 Share on other sites More sharing options...
fjh Posted November 15, 2024 Share Posted November 15, 2024 On 11/15/2024 at 1:53 PM, cruiseliner64 said: Is cylinder wash a problem without this working? Iv no experence with Mack engines and im getting advice from two sides...one says I dont need it and one says ill do damage to the engine because of cylinder wash from overfueling.....thanks for your input by the way... Paul Expand Naw long as the compression is good it will be fine just a little to alot of black smoke till the turbo spools up! Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562006 Share on other sites More sharing options...
fjh Posted November 15, 2024 Share Posted November 15, 2024 On 11/15/2024 at 1:35 AM, Licensed to kill said: No idea what pump is on this engine and do not know how to identify it. Expand Post a picture! Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562007 Share on other sites More sharing options...
cruiseliner64 Posted November 15, 2024 Share Posted November 15, 2024 On 11/15/2024 at 1:59 PM, fjh said: Naw long as the compression is good it will be fine just a little to alot of black smoke till the turbo spools up! Expand Yes I do notice that the exhaust is clean after the turbo spools up and the engine produces very little smoke if i ease the the power on instead of just flooring it. Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562008 Share on other sites More sharing options...
MACKS Posted November 15, 2024 Share Posted November 15, 2024 On 11/15/2024 at 1:53 PM, cruiseliner64 said: Is cylinder wash a problem without this working? Iv no experence with Mack engines and im getting advice from two sides...one says I dont need it and one says ill do damage to the engine because of cylinder wash from overfueling.....thanks for your input by the way... Paul Expand Like I said take it easy on the pedal I don’t really mean hold back just drive normal and u will be fine ,some guys love to roll coal so they just put it to floor ..lol 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562009 Share on other sites More sharing options...
Popular Post Geoff Weeks Posted November 15, 2024 Popular Post Share Posted November 15, 2024 Wash down of bores is more a problem when and engine idles, you get incomplete combustion and condensed fuel on the cyl walls. 'Rolling coal" tends to get hard carbon build up above the top piston ring, wearing (scoring) the bores. Best way to prevent carbon formation is to burn with enough air for complete combustion. Neither are good for an engine. 3 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562012 Share on other sites More sharing options...
mrsmackpaul Posted November 16, 2024 Share Posted November 16, 2024 Give me a few days and I'll see what I can find for you Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562062 Share on other sites More sharing options...
Licensed to kill Posted November 16, 2024 Author Share Posted November 16, 2024 On 11/15/2024 at 2:03 PM, fjh said: Post a picture! Expand 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562081 Share on other sites More sharing options...
fjh Posted November 17, 2024 Share Posted November 17, 2024 On 11/16/2024 at 9:03 PM, Licensed to kill said: Expand Ambac Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562085 Share on other sites More sharing options...
mrsmackpaul Posted November 18, 2024 Share Posted November 18, 2024 On 11/15/2024 at 1:53 PM, cruiseliner64 said: Is cylinder wash a problem without this working? Iv no experence with Mack engines and im getting advice from two sides...one says I dont need it and one says ill do damage to the engine because of cylinder wash from overfueling.....thanks for your input by the way... Paul Expand I just did some Googling and quickly found this Pretty sure it is what your chasing https://www.woodlineparts.com/en-au/products/pai-eac-3964-mack-31qc212-rack-limiting-air-cylinder-e6-ambac If it isn't, I'll chase something up locally Paul Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562139 Share on other sites More sharing options...
cruiseliner64 Posted November 18, 2024 Share Posted November 18, 2024 On 11/18/2024 at 2:46 AM, mrsmackpaul said: I just did some Googling and quickly found this Pretty sure it is what your chasing https://www.woodlineparts.com/en-au/products/pai-eac-3964-mack-31qc212-rack-limiting-air-cylinder-e6-ambac If it isn't, I'll chase something up locally Paul Expand Thats it ok Paul...thanks.My son was looking it up too but we didnt come across that.maybe we just used the wrong description....thanks Paul Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562143 Share on other sites More sharing options...
fjh Posted November 18, 2024 Share Posted November 18, 2024 On 11/18/2024 at 9:52 AM, cruiseliner64 said: Thats it ok Paul...thanks.My son was looking it up too but we didnt come across that.maybe we just used the wrong description....thanks Paul Expand yup thats it! Remember you need to shim it! or the engine will be slow to respond! Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562147 Share on other sites More sharing options...
cruiseliner64 Posted November 18, 2024 Share Posted November 18, 2024 On 11/18/2024 at 2:48 PM, fjh said: yup thats it! Remember you need to shim it! or the engine will be slow to respond! Expand There doesnt appear yo be any shims on it at the moment but that doesnt mean a new one wont need to be shimed.I did see how to work out the shims needed but I forget..do you or anyone else know? Thanks Paul Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562149 Share on other sites More sharing options...
fjh Posted November 18, 2024 Share Posted November 18, 2024 On 11/18/2024 at 3:24 PM, cruiseliner64 said: There doesnt appear yo be any shims on it at the moment but that doesn't mean a new one wont need to be shimed.I did see how to work out the shims needed but I forget..do you or anyone else know? Thanks Paul Expand Correct doubt if you can buy shims so if you can find a 9/16 flat washer slightly thicker than what is stamped on the pump you will likely be happy with your out come ! 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562152 Share on other sites More sharing options...
cruiseliner64 Posted November 18, 2024 Share Posted November 18, 2024 On 11/18/2024 at 3:48 PM, fjh said: Correct doubt if you can buy shims so if you can find a 9/16 flat washer slightly thicker than what is stamped on the pump you will likely be happy with your out come ! Expand Great.I'll order that valve.many thanks to you and mrs Mack for your help. Paul Quote Link to comment https://www.bigmacktrucks.com/topic/74727-tip-turbine-boost/page/4/#findComment-562155 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.