Joseph Cummings Posted December 16 Share Posted December 16 1 minute ago, Joey Mack said: JC.. He has an E-Tech... A different cam then an E-7.. Not sure if you knew that .. Jojo E tech is the one with the inj pumps running off the cam right? Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564104 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 yes sir it is.. if you look at the picture he posted again you will see the wide cam lobe.. that is the lobe that operates the E.U.P. ( Electronic Unit Pump)... Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564105 Share on other sites More sharing options...
The Heinz Posted December 16 Share Posted December 16 I used a 2001 ETECH 460 as a reference, and found a cam kit on PAI #ECK-9009E. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564106 Share on other sites More sharing options...
Mark T Posted December 16 Share Posted December 16 In 2024 ? that price isn't shocking in the least. Cam followers H clips gaskets. Wonder if that's with followers for the unit pumps too. Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564107 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 thats more like it... I knew that other price was crazy.. What H.P. rating is your E-Tech? Good job Heinzy... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564108 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 MarkT, he will need to check the H-Rings positions and depth. Still dont know if he is doing this repar or another guy.. Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564109 Share on other sites More sharing options...
Mark T Posted December 16 Share Posted December 16 Truck parts are nuts any more. Couple weeks ago, I had to pay $2300.00 for an exhaust pipe. Nothing surprises me. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564110 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 Heinz?? can you find him the offset cam key? 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564111 Share on other sites More sharing options...
The Heinz Posted December 16 Share Posted December 16 PAI EKY-3179OEM, Mack OEM 20706394. The Mack might end up being cheaper depending on your dealer. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564116 Share on other sites More sharing options...
880joe Posted December 16 Share Posted December 16 Are the offset cam keys available? Last time I checked they weren't available from Mack or PAI Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564118 Share on other sites More sharing options...
The Heinz Posted December 16 Share Posted December 16 5 minutes ago, 880joe said: Are the offset cam keys available? Last time I checked they weren't available from Mack or PAI They're available now, there's not a lot in the system, but they're available. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564120 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 3 hours ago, Joseph Cummings said: Mack E7 Camshaft Remanufactured Reman (all #s) - $650.00 exchange and a core deposit of $300.00 https://atldiesel.com/pages/camshaft-service Thank you for some direction. I did see that but I don't have part number so I have some things to figure somethings out. I also see that they can repair the camshaft that I have. Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564127 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 1 hour ago, Joey Mack said: thats more like it... I knew that other price was crazy.. What H.P. rating is your E-Tech? Good job Heinzy... 460 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564128 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 the cam number is stamped on the front end of it. the front cover needs to come off.. Are you going to do the work, or someone else?? Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564129 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 1 hour ago, Joey Mack said: MarkT, he will need to check the H-Rings positions and depth. Still dont know if he is doing this repar or another guy.. Im doing the rebuild myself jo 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564130 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 ok.. you will re-use your cam key.. White side faces forward !!! Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564131 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 Just now, Joey Mack said: the cam number is stamped on the front end of it. the front cover needs to come off.. Are you going to do the work, or someone else?? I've familiar with rebuilds but haven't done as many as you guys so any information is helpful 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564132 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 Just now, Joey Mack said: ok.. you will re-use your cam key.. White side faces forward !!! Ok. Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564133 Share on other sites More sharing options...
fjh Posted December 16 Share Posted December 16 Just now, Bliue dm said: I've familiar with rebuilds but haven't done as many as you guys so any information is helpful Do you have a press? 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564134 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 It's good that you are familiar. ask any question you may have ,,, SMALL--- or--- BIG.. we got this.. Many of us have been here, I myself have done dozens of these... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564135 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 Please more info on h- rings and depth. Are w talking about the clips that hold lifters in place? Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564136 Share on other sites More sharing options...
Bliue dm Posted December 16 Author Share Posted December 16 1 minute ago, fjh said: Do you have a press? Yes Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564137 Share on other sites More sharing options...
fjh Posted December 16 Share Posted December 16 1 minute ago, Bliue dm said: Please more info on h- rings and depth. Are w talking about the clips that hold lifters in place? H ring’s keep ‘em straight Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564138 Share on other sites More sharing options...
fjh Posted December 16 Share Posted December 16 2 minutes ago, fjh said: H ring’s keep ‘em straight Lifter sticks? They will be handy for this project! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564140 Share on other sites More sharing options...
Joey Mack Posted December 16 Share Posted December 16 I wish I could post pictures again... the H-Rings keep the lifters in-line.. the tool is about $400.00 at tillman tools, there are other sellers. I promise I am not trying to make a mountain out of a molehill, I just want to help educate you.. with respect.. Jojo I am passionate about these engines.. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/74845-2000-mack-e7-rocker-arm/page/2/#findComment-564141 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.