polracer01 Posted January 13 Share Posted January 13 Looking for part number 119ax3723 right angle adapter for tachometer, Any help would be appreciated not able to find any available. Quote Link to comment https://www.bigmacktrucks.com/topic/74993-tach-drive/ Share on other sites More sharing options...
steve s. Posted January 17 Share Posted January 17 If the Mack part number is not helping you, just look for a ratio adapter with the type of drives you need. I assume that you need a 1 to 1 which should be easy to find. Try ebay, there are always some there. The same part can also be found on many old transmissions as well for speedometer drives. If you find used ones the ratio is usually stamped on the adapter housing. You will need either a square or round drive, and you'll need to know the size of the drive as well. Quote Link to comment https://www.bigmacktrucks.com/topic/74993-tach-drive/#findComment-566681 Share on other sites More sharing options...
polracer01 Posted January 18 Author Share Posted January 18 Thanks for the response steve... I agree 1:1 is available but this is 1:.875 which is an odd ball ratio Quote Link to comment https://www.bigmacktrucks.com/topic/74993-tach-drive/#findComment-566795 Share on other sites More sharing options...
Geoff Weeks Posted January 18 Share Posted January 18 never seen a tach drive that wasn't either 1:1 or .5;1 Either camshaft speed (most four cycle) or 1:1 for two strokes. Quote Link to comment https://www.bigmacktrucks.com/topic/74993-tach-drive/#findComment-566801 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.