Lmackattack Posted Friday at 09:58 PM Share Posted Friday at 09:58 PM how difficult is it to swap from a manual to power window. Im just intrested in the Passenger window for now. 1) will the power regulator bolt in the stock door shell? 2) is there a special wire harness that can simply plug and play between the door,dash harness and the dash switch? Thank you Quote Link to comment https://www.bigmacktrucks.com/topic/75312-2003-granite-manual-to-power-window-conversion/ Share on other sites More sharing options...
Joey Mack Posted Friday at 10:19 PM Share Posted Friday at 10:19 PM Have you pulled the center dash panel above the HVAC controls, to see if the power window plug is tied back out of the way? I think its there, just not installed on the build sheet. I expect you to have switch blanks in that panel so you can put the switch there and not have to change the drivers door set up. Unless you have power driver side, and theres a blank in that small panel.. Quote Link to comment https://www.bigmacktrucks.com/topic/75312-2003-granite-manual-to-power-window-conversion/#findComment-571780 Share on other sites More sharing options...
Joey Mack Posted Friday at 10:20 PM Share Posted Friday at 10:20 PM Do you have the fuse panel chart to show where the fuse would go? Quote Link to comment https://www.bigmacktrucks.com/topic/75312-2003-granite-manual-to-power-window-conversion/#findComment-571781 Share on other sites More sharing options...
Lmackattack Posted Friday at 11:58 PM Author Share Posted Friday at 11:58 PM I have not looked behind the dash for the plug. That was one of my questions as if they would build the dash harness with it set up for a power window even if not installed I will check the fuse panel to see if it has a slot available 1 Quote Link to comment https://www.bigmacktrucks.com/topic/75312-2003-granite-manual-to-power-window-conversion/#findComment-571787 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.