WattsMack Posted March 22, 2009 Share Posted March 22, 2009 Hi guys i have never had a blog before and hope this goes well and could use your help. iam helping a friend work on his B 53 1964 dump. i plumbed the truck for air to the rear for his trailer and rewired it so it will not start to glow (get my drift) the truck was set up with a turn signal circut and a brake circut. easy fix with 2 sets of lites in the rear. now the issue of my friend pulling my small trailer with electric brakes. i will install a brake controller in the cab but i have 2 circuts to work with. is my best bet to put a new turn signal switch in and wire the brake lites in through that so the signals work together with the brakes and work with the trailer wiring....the truck isnt on the road yet, but soon to be.thanks guys ( don) GreenGiant2 PS MACKS AND BROCKWAY'S WHAT A PERFECT COMBINATIONView the full blog entry Quote Link to comment https://www.bigmacktrucks.com/topic/8745-new-bmt-blog-entry-greengiant2s-blog-b-model-wiring/ Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.