n2deep Posted April 19, 2009 Share Posted April 19, 2009 I ordered a new set of door locks and ignition tumbler. My door locks were already removed what holds them in. Thanks for all your help. Quote Link to comment https://www.bigmacktrucks.com/topic/9091-r-600-door-locks/ Share on other sites More sharing options...
HK Trucking Posted April 19, 2009 Share Posted April 19, 2009 I ordered a new set of door locks and ignition tumbler. My door locks were already removed what holds them in. Thanks for all your help.A clip that slides thru that slot in the door right near where the latch is.The clip has a hole in the end of it, you slide the clip thru the slot until the hole in the clip lines up with the round hole in the door, then you put the lock cylinder in the hole (make sure you get that square peg into the locking mechanism inside the door as you put the lock cylinder in the hole), then once the lock cylinder is all the way in the hole, you push the clip further in to retain the lock cylinder in the door.Sometimes they can be a PITA.. Quote "If You Can't Shift It Smoothly, You Shouldn't Be Driving It" Link to comment https://www.bigmacktrucks.com/topic/9091-r-600-door-locks/#findComment-34014 Share on other sites More sharing options...
n2deep Posted April 20, 2009 Author Share Posted April 20, 2009 I found the clips down in the bottom of the doors. Went back fairly easy. thanks for the help Quote Link to comment https://www.bigmacktrucks.com/topic/9091-r-600-door-locks/#findComment-34108 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.