IdleUp Posted April 28, 2009 Share Posted April 28, 2009 I was shifting gears today and all of a sudden I started losing air from the area of the shifter handle. I found one of the two screws had loosened up. Anyhow I removed the other screw the Low / low shifter parts flew out which consist of two springs and plastic piece and a rubber seal. Is there any trick with regard to re-assembling the shifter. Quote Link to comment https://www.bigmacktrucks.com/topic/9197-fulton-shifter-problem/ Share on other sites More sharing options...
mackdaddy1911a1 Posted April 28, 2009 Share Posted April 28, 2009 If nothing is broken just clean everything and oil the O rings with motor oil and reassemble. Quote THE GREATEST NAME IN TRUCKS MACK TRUCKS Link to comment https://www.bigmacktrucks.com/topic/9197-fulton-shifter-problem/#findComment-34466 Share on other sites More sharing options...
IdleUp Posted April 28, 2009 Author Share Posted April 28, 2009 If nothing is broken just clean everything and oil the O rings with motor oil and reassemble.I was just curious how you get the rubber seal in that grove when you assemble the whole thing - it takes some pretty good pressure to hold all that together.Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/9197-fulton-shifter-problem/#findComment-34481 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.