Jump to content

Recommended Posts

HI GUYS,

I HAVE A QUESTION ABOUT A R-MODEL WE ARE WORKING ON. THE AIR CLEANER WE HAVE FOR THE TRUCK HAS TWO HOLES IN THE AIR CLEANER, AVOUISLEY ONE OF THE HOLES IS FOR THE TURBO INLET BUT THE OTHE HOLE HAS A SMALL AIR CYLINDER IN IT, :unsure: ATTACHED TO A FLAP. I WAS WONDERING IF ANYBODY COULD DESCRIBE TO ME WAHT IS FOR AND HOW IT GETS HOOKED UP TO THE TRACTOR. :unsure::angry:

Link to comment
https://www.bigmacktrucks.com/topic/9518-1968-69-r600-mack/
Share on other sites

That little air cylinder was hooked up to the air line that operates the windshield wiper motor.

The flap the cylinder is connected to is designed to allow the air cleaner to draw air from under the hood when it is raining or snowing.

The thought behind this apparently was that when it's raining or snowing, the wipers will be on, hence connecting that cylinder to the wiper air line will ensure that the air cleaner is drawing underhood air during rain or snow conditions.

The reason for drawing underhood air is to prevent sucking in rain or snow into the oil bath air cleaner and contaminating the oil bath with water.

Some trucks in that time frame had a manual control on the dash for outside air or underhood air instead of the air actuated type.

"If You Can't Shift It Smoothly, You Shouldn't Be Driving It"

Link to comment
https://www.bigmacktrucks.com/topic/9518-1968-69-r600-mack/#findComment-35791
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...