itlldo1 Posted May 31, 2009 Share Posted May 31, 2009 Looking at a 76 F Model that the owner says needs a clutch. This appears to be a 237 with a five speed. Any idea if this is a single or dual disk design? Push or Pull? Thanks-MBF Quote Is it just me or did those buffalo wings taste like chicken? Link to comment https://www.bigmacktrucks.com/topic/9559-f-model-clutch/ Share on other sites More sharing options...
theakerstwo Posted May 31, 2009 Share Posted May 31, 2009 That will be a 2" pull type and dont know but could be a 14" or a 15.5" but you can tell by you self by pulling the dust cover on the bottom and looking in there. The 14" will use a dish flywheel were a 15.5 will use a flat flywheel. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/9559-f-model-clutch/#findComment-35947 Share on other sites More sharing options...
HK Trucking Posted June 1, 2009 Share Posted June 1, 2009 That year and engine, I'd bet on a 14" double disc pull type (dish type flywheel).Before you decide that it needs a clutch, see if the pressure plate can be adjusted. Maybe someone unfamiliar with this setup tried adjusting it at the external linkage and had unsatisfactory results.(Don't tell the seller that though, maybe you can get a steal of a deal on a truck that only needs a proper clutch adjustment). Quote "If You Can't Shift It Smoothly, You Shouldn't Be Driving It" Link to comment https://www.bigmacktrucks.com/topic/9559-f-model-clutch/#findComment-35968 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.